Quote:
Originally Posted by dstevens
Yep, after resetting the ECU you need at least two driving cycles from cold to set the readiness codes. There might also be some other conditions - maintaining 40 mph for 90 seconds, that sort of thing. Normally the manual will give the technique to set each readiness code, but I can't find any reference to this in the Lotus manual. The only odd thing is that normally the o2 sensor and o2 sensor heater readiness is set within 30 seconds once the engine is warm.
|
I combed through the manual as well with no luck. Did some searches on here too, but the 'procedure" is still a mystery. If I ever learn it, I'll be sure and share.
This needs to work itself out...I have never wanted to visit the DMV and pay taxes so bad in my life! 
__________________
1996 Ducati 916 Strada Nichols Flywheel, Motowheels Slipper clutch, Arrow Titanium Exhaust, lots of CF bits
2007 Exige S265 PoB, Touring, Track, TC, LSD, SS, Gotham tune, Larini 6" Club Sport, Sector eliminator; 55W DDM HID; Manly Motor Mounts, Carbon Splitter, Braille, Sector Tow Hooks, Multivex
2008 VW Rabbit 2.5 (daily driver)
2008 Ford F-150 5.7 4x4 (hauler)
|