LotusTalk - The Lotus Cars Community - View Single Post

Kris from DRS · 04-25-2009, 06:59 PM

also, DO NOT change your firmware or use non-DBW controller maps. This could result in a very bad running engine and/or possible damage to the ECU and your engine.

The new firmware developed for the SC and NA applications is specific to those cars and so is the wiring. You can convert to this by using a manual or stand-alone boost controller. If you do this contact me so that I can convert your map over.

New firmware might be available for the turbo cars soon, depending on some hardware options internal to the box. For now just use what you have already. Of course you are welcome to email me maps, etc...

Kris

04-25-2009, 06:59 PM	#13 (permalink)
Kris from DRS Dynamic Racing Solutions Join Date: Oct 2006 Location: La Habra CA Posts: 343	also, DO NOT change your firmware or use non-DBW controller maps. This could result in a very bad running engine and/or possible damage to the ECU and your engine. The new firmware developed for the SC and NA applications is specific to those cars and so is the wiring. You can convert to this by using a manual or stand-alone boost controller. If you do this contact me so that I can convert your map over. New firmware might be available for the turbo cars soon, depending on some hardware options internal to the box. For now just use what you have already. Of course you are welcome to email me maps, etc... Kris __________________ Motorsport Components and Expert Service. Complete Lotus maintenance, installations, track preparation and specialty services.