Quote:
Originally Posted by breinhar
Well I tried the painting this weekend, I couldn't get it to adhere to the metal well, I could scratch it right off. So I took it all back off again. I used am automotive primer and krylon paint. The problem i think is that i didnt rough up the door at all.
|
Hmmm...I used flat black Krylon as well, but I don't recall priming it before. If I did, it would have been with an aluminum etching type of primer that I bought at Auto Zone, which I used on my diffuser.
One thing I do remember is that I painted it on a pretty warm day with low humidity. I also recall doing several very light coats, letting it dry in between each one. Is it possible you might have put it on too thick?
Good luck!
Andy