LotusTalk - The Lotus Cars Community - View Single Post - Baseline Dyno Plots. Post Your Dyno Plots here

raygr · 05-10-2007, 08:25 PM

Exige S, Larini Exhaust, FF street headers & cat, ReVerie Daytona Intake, Shell V-Power 92 gas.

This compares my best run w/o the headers with the best run with the headers. The best run was obtained by spraying compressed air into the roof intake to cool the charge-cooler. Intake air temp went from 85 deg F to 123 deg F in 1 pull!

I'm concerned now that it is too lean. We may install larger injectors.

05-10-2007, 08:25 PM	#36 (permalink)
raygr I have 4-Wheel OCD Join Date: Oct 2005 Location: Seattle Area Posts: 371	Exige S w/FF Headers Exige S, Larini Exhaust, FF street headers & cat, ReVerie Daytona Intake, Shell V-Power 92 gas. This compares my best run w/o the headers with the best run with the headers. The best run was obtained by spraying compressed air into the roof intake to cool the charge-cooler. Intake air temp went from 85 deg F to 123 deg F in 1 pull! I'm concerned now that it is too lean. We may install larger injectors. Attached Images __________________ Ray in Washington State - 06 Elise, 07 Exige S www.mentalmotoring.com Last edited by raygr : 05-11-2007 at 11:44 AM.