Anyone in central NJ can help with Stage 2 install? - LotusTalk

s14roller · 09-08-2008, 01:41 PM

I'm buying a stage 2 from another member on the forum and was wondering if anyone local to central NJ could help with the install. I think the actual install shouldn't be too hard but am more concerned with cutting the diffusor. Anyone local done it before and can lend a hand?

Thanks,

Jack

kestrel74 · 09-08-2008, 01:45 PM

It's a

kestrel74 · 09-08-2008, 01:49 PM

I'll bet exarkun1178 can help ya out !

NJdrool · 09-08-2008, 01:49 PM

I've never done it before but can stop by to drink your beer

Seriously if you need help let me know and I am sure we can work through it together. I have a stage II as well so that helps to measure the diffuser.

Here is the post on the stage II install Stage II install

glb · 09-08-2008, 02:50 PM

If you need help, tools, ramps, garage, etc., you can contact me. I've not (& would never) install a Stage 2, but it can't be too difficult. Do you need to get another exhaust clamp as I saw here today?

-g

macdady2424 · 09-08-2008, 04:44 PM

I've done mine in 20 mins.
I could help, didn't even lift the car up.

macdady2424 · 09-08-2008, 04:45 PM

Oh yeah, and I have the jig saw I used to cut the diffuser. Came out well, don't try a dremel as people suggested b/c you'll be there all day.

macdady2424 · 09-08-2008, 04:47 PM

Quote:

Originally Posted by NJdrool

I've never done it before but can stop by to drink your beer

Seriously if you need help let me know and I am sure we can work through it together. I have a stage II as well so that helps to measure the diffuser.

Here is the post on the stage II install Stage II install

In fact, if u buy a case of Guinness, I'm sure NJDrool and I can do the entire job, just name a location and time. And I would be professional and start drinking after the stage II was back on, but not the bottom diffuser. I'll leave that for someone else to put back on.

s14roller · 09-08-2008, 05:18 PM

Haha, you guys are awesome.

Case of beer is no problem!

Any recommendations where we can meet for this? I assume the place with the tools would make sense? I'm between places right now so don't currently have a garage available =(

s14roller · 09-08-2008, 05:27 PM

Quote:

Originally Posted by glb

Do you need to get another exhaust clamp as I saw here today?

-g

G, is that question directed to me? Not sure what you mean?

Jack

NJdrool · 09-08-2008, 05:53 PM

Quote:

Originally Posted by s14roller

G, is that question directed to me? Not sure what you mean?

Jack

Yes. I think it was.

Read the install thread. Quoting below:

12. NOTE: OEM exhaust clamp wasn’t used, as it didn’t tighten down enough on Stage 2 exhaust. I bought a Stainless Steel T-clamp (Summit Racing, $5.50) instead.

exarkun1178 · 09-08-2008, 06:33 PM

i am avaiable for help, pretty easy, let me know when and where. note this sunday peck555 is have a lotus bbq and drive. im sure it would take every little time if we did it then...

macdady2424 · 09-09-2008, 09:47 AM

You shouldn't need a new exhaust clamp, if that's what GLB meant.

I have a garage, and changed my exahaust outside b/c it was nice and no need to do it in the garage. A driveway would work.

Also, you don't need many tools, basic tool kit and the little saw will cover it.

And I would be down to meet up on Saturday afternoon or on Sunday before the BBQ, but looks like there's a chance of rain. With that in mind, anyone wanna meet up somewhere on Sat or Sun before the BBQ and help out.

s14roller · 09-09-2008, 10:46 AM

macdady2424 -

I'm sending payment for the exhaust today so I may not get the exhaust until sometime early next week.

Will be out of the state next 2 weekends but should have everything ready to go when I get back.

I'll send some PMs to organize time/place. Again, I greatly appreciate everyone's willingness to help out!

Jack

Bavarian Motorist · 09-09-2008, 10:54 AM

It's not that hard. I recommend buying a lead mallet to get the stock exhaust out... Those things can be a bitch.

glb · 09-09-2008, 12:32 PM

sorry, confused.

Does anyone need to use my garage &/or tools? If so, when?

-g

waydui · 09-09-2008, 01:26 PM

Quote:

Originally Posted by glb

Do you need to get another exhaust clamp as I saw here today?-g

Yes, you will need a new exhaust clamp if you're replacing the stock exhaust that came with the car. I replaced my stock exhaust with a Stage 2.

The clamp on the stock exhaust is welded on to the pipe and has to be cut off. A Dremmel tool works fine for this. I did that, but then found that the stock clamp was too large in diameter to properly seal the pipes on the new Stage 2.

Also, PB Blaster is your friend. That stuff loosens everything up. Pipes just slid apart after soaking for about 5 minutes.

Good luck, it's not that hard a job. 4 beers should cover it!

Regards,
Wayne

glb · 09-09-2008, 02:07 PM

Yes, what waydui said.

BTW, i got some new rust-killer stuff tim muller recommended and can't wait to try it (see: kid, new toy

).

see the thread about exhaust clamps and notice recommended types of clamps; i use the stainless steel "aircraft" type but don't know if I have one that fits this application as I don't know the size.

-g

Bavarian Motorist · 09-09-2008, 02:10 PM

Quote:

Originally Posted by waydui

Also, PB Blaster is your friend. That stuff loosens everything up. Pipes just slid apart after soaking for about 5 minutes.

Regards,
Wayne

Lead mallet is more fun

glb · 09-09-2008, 02:38 PM

Quote:

Originally Posted by Bavarian Motorist

Lead mallet is more fun

gee....that's not how I open beers.

09-08-2008, 01:41 PM	#1 (permalink)
s14roller Registered User Join Date: Sep 2007 Posts: 138	Anyone in central NJ can help with Stage 2 install? I'm buying a stage 2 from another member on the forum and was wondering if anyone local to central NJ could help with the install. I think the actual install shouldn't be too hard but am more concerned with cutting the diffusor. Anyone local done it before and can lend a hand? Thanks, Jack __________________ 05 Chrome Orange Elise Touring pack, Sports pack, Starshield, Stage II, HIDs

09-08-2008, 01:45 PM	#2 (permalink)
kestrel74 G-200 Driver Join Date: Jun 2004 Location: North of Detroit; Watkins Glen, NY Posts: 7,296	It's a Attached Images __________________ 74 Europa Zetec TC Special 3614R Elise #2292 / Chrome Orange !! / Starshield / Sachs suspension / RTDbrace / Uprights machined / Down Low rails / ... "My daily driver does .85 Mach" " I started flying when Sex was safe and Hang Gliding was dangerous " BUY My Europa ! http://www.lotustalk.com/forums/f94/...pa-sale-43829/

09-08-2008, 01:49 PM	#3 (permalink)
kestrel74 G-200 Driver Join Date: Jun 2004 Location: North of Detroit; Watkins Glen, NY Posts: 7,296	I'll bet exarkun1178 can help ya out ! __________________ 74 Europa Zetec TC Special 3614R Elise #2292 / Chrome Orange !! / Starshield / Sachs suspension / RTDbrace / Uprights machined / Down Low rails / ... "My daily driver does .85 Mach" " I started flying when Sex was safe and Hang Gliding was dangerous " BUY My Europa ! http://www.lotustalk.com/forums/f94/...pa-sale-43829/

09-08-2008, 01:49 PM	#4 (permalink)
NJdrool Finally Join Date: Mar 2007 Location: NJ Posts: 377	I've never done it before but can stop by to drink your beer Seriously if you need help let me know and I am sure we can work through it together. I have a stage II as well so that helps to measure the diffuser. Here is the post on the stage II install Stage II install __________________ Bob in NJ 06 Sport Elise # 23 Stage II/Micromirror/Green wire mod/S111 tow hook/BWR front plate holder/Green filter/desnorkled/HID's-Hi & Low/Stealth Bulbs.

09-08-2008, 02:50 PM	#5 (permalink)
glb Unattractive Nuisance Join Date: May 2005 Location: Chester, NJ Posts: 3,434	If you need help, tools, ramps, garage, etc., you can contact me. I've not (& would never) install a Stage 2, but it can't be too difficult. Do you need to get another exhaust clamp as I saw here today? -g __________________ 05 elise (PES chip, SSRs, Sirius, shift tower reinforcement, Multivex; HID low beams) 05 Corolla XRS; 72 Elan Sprint, 170 hp (Sold) "I can resist anything except temptation" O. Wilde. "Political language is designed to make lies sound truthful and murder respectable." G. Orwell, 1946.

09-08-2008, 04:44 PM	#6 (permalink)
macdady2424 Registered User Join Date: Mar 2007 Location: Northern NJ Posts: 937	I've done mine in 20 mins. I could help, didn't even lift the car up. __________________ 225 TTQC & 05 Elise

09-08-2008, 04:45 PM	#7 (permalink)
macdady2424 Registered User Join Date: Mar 2007 Location: Northern NJ Posts: 937	Oh yeah, and I have the jig saw I used to cut the diffuser. Came out well, don't try a dremel as people suggested b/c you'll be there all day. __________________ 225 TTQC & 05 Elise

09-08-2008, 05:18 PM	#9 (permalink)
s14roller Registered User Join Date: Sep 2007 Posts: 138	Haha, you guys are awesome. Case of beer is no problem! Any recommendations where we can meet for this? I assume the place with the tools would make sense? I'm between places right now so don't currently have a garage available =( __________________ 05 Chrome Orange Elise Touring pack, Sports pack, Starshield, Stage II, HIDs Last edited by s14roller : 09-08-2008 at 05:24 PM.

09-08-2008, 06:33 PM	#12 (permalink)
exarkun1178 Registered User Join Date: Feb 2007 Location: Point Pleasant Beach, NJ Posts: 3,624	i am avaiable for help, pretty easy, let me know when and where. note this sunday peck555 is have a lotus bbq and drive. im sure it would take every little time if we did it then...

09-09-2008, 09:47 AM	#13 (permalink)
macdady2424 Registered User Join Date: Mar 2007 Location: Northern NJ Posts: 937	You shouldn't need a new exhaust clamp, if that's what GLB meant. I have a garage, and changed my exahaust outside b/c it was nice and no need to do it in the garage. A driveway would work. Also, you don't need many tools, basic tool kit and the little saw will cover it. And I would be down to meet up on Saturday afternoon or on Sunday before the BBQ, but looks like there's a chance of rain. With that in mind, anyone wanna meet up somewhere on Sat or Sun before the BBQ and help out. __________________ 225 TTQC & 05 Elise

09-09-2008, 10:46 AM	#14 (permalink)
s14roller Registered User Join Date: Sep 2007 Posts: 138	macdady2424 - I'm sending payment for the exhaust today so I may not get the exhaust until sometime early next week. Will be out of the state next 2 weekends but should have everything ready to go when I get back. I'll send some PMs to organize time/place. Again, I greatly appreciate everyone's willingness to help out! Jack __________________ 05 Chrome Orange Elise Touring pack, Sports pack, Starshield, Stage II, HIDs

09-09-2008, 10:54 AM	#15 (permalink)
Bavarian Motorist Live to Drive Join Date: Nov 2006 Location: Rye, NY Posts: 8,365	It's not that hard. I recommend buying a lead mallet to get the stock exhaust out... Those things can be a bitch. __________________ Driving a Lotus Exige with sticky... performance tires on icy roads or in standing water is about as much fun as walking a high wire treated with WD-40 - Car & Driver BWR supercharged... I suppose I "got the power" now??

09-09-2008, 12:32 PM	#16 (permalink)
glb Unattractive Nuisance Join Date: May 2005 Location: Chester, NJ Posts: 3,434	sorry, confused. Does anyone need to use my garage &/or tools? If so, when? -g __________________ 05 elise (PES chip, SSRs, Sirius, shift tower reinforcement, Multivex; HID low beams) 05 Corolla XRS; 72 Elan Sprint, 170 hp (Sold) "I can resist anything except temptation" O. Wilde. "Political language is designed to make lies sound truthful and murder respectable." G. Orwell, 1946.

09-09-2008, 02:07 PM	#18 (permalink)
glb Unattractive Nuisance Join Date: May 2005 Location: Chester, NJ Posts: 3,434	Yes, what waydui said. BTW, i got some new rust-killer stuff tim muller recommended and can't wait to try it (see: kid, new toy). see the thread about exhaust clamps and notice recommended types of clamps; i use the stainless steel "aircraft" type but don't know if I have one that fits this application as I don't know the size. -g __________________ 05 elise (PES chip, SSRs, Sirius, shift tower reinforcement, Multivex; HID low beams) 05 Corolla XRS; 72 Elan Sprint, 170 hp (Sold) "I can resist anything except temptation" O. Wilde. "Political language is designed to make lies sound truthful and murder respectable." G. Orwell, 1946.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode