Air bag cable - LotusTalk

BRTHTAKR · 09-09-2009, 07:39 PM

I'm in the quest to disable my air bag light. Both airbags and and the seatbelt tension adjusters have been removed. The plan is to place 3.3 ohm resistors where each of these four once connected.
Problem is that I can not locate the cable (SRS harness?) for the driver's airbag. A removable hub was placed by someone else, and I have not been able to trace it down. I did get a good drunk feeling from standing on my head under the steering column though.
Can anyone direct me as to where this cable/harness would connect to the wiring?

Second question: if the quest fails to place the 4 resistors, is it possible to remove the instrument cluster and merely assassinate the idiot light source directly?

JWA · 09-09-2009, 08:11 PM

Paging Thomasio... If he doesn't see this post, send him a PM. He has been all through the airbag wiring chasing down an SRS fault all summer. He can probably point you in the right direction.

09-09-2009, 07:39 PM	#1 (permalink)
BRTHTAKR AKA XHILR8N! Join Date: Dec 2006 Location: Asheville, North Carolina Posts: 1,151 Images: 6	Air bag cable I'm in the quest to disable my air bag light. Both airbags and and the seatbelt tension adjusters have been removed. The plan is to place 3.3 ohm resistors where each of these four once connected. Problem is that I can not locate the cable (SRS harness?) for the driver's airbag. A removable hub was placed by someone else, and I have not been able to trace it down. I did get a good drunk feeling from standing on my head under the steering column though. Can anyone direct me as to where this cable/harness would connect to the wiring? Second question: if the quest fails to place the 4 resistors, is it possible to remove the instrument cluster and merely assassinate the idiot light source directly? __________________ Simplicity is the ultimate sophistication. Leonardo Da Vinci 2005 Elise LRG, Trim Shop interior, full cage, Cup wheels, other stuff. 2007 Toyota Tundra (about 10 cup holders) 2004 BMW X3 (4 small cup holders) 1980 Rover SD1

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-09-2009, 08:11 PM	#2 (permalink)
JWA #33 Join Date: Jan 2004 Location: Racine, WI Posts: 3,737	Paging Thomasio... If he doesn't see this post, send him a PM. He has been all through the airbag wiring chasing down an SRS fault all summer. He can probably point you in the right direction.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)