|
|
|
|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
10-25-2007, 09:41 AM
|
#1 (permalink) |
|
Registered User
|
broken exhaust mount in cup car
This past weekend while i was on the track my exhaust clamp came loose. I lowered the rear tray and tightened the clamp . It came loose after five more minutes on the track. Apparently when this clamp looses its integrity it is time to change it. No damage to the car but very annoying.
 Update I went out this weekend and noticed my abs light coming on. Checked the rear wheels and to my disbelief both fender liners had melted and broken away from the supports. Agh!!!
__________________
www.lotuschallengeseries.com Last edited by jplotus : 11-05-2007 at 10:20 AM. |
|
|
|
10-25-2007, 10:00 AM
|
#2 (permalink) |
|
-30-
|
i think you could probably remove one of the spacers and tighten her back up. certainly good enough for a paddock repair.
__________________
2007 Exige S, Storm Ti. Sport, Track and TC.Plus: Multivex Mirrors, S111 Deltabrace, Sparco 6Pt harnesses (w/Ti Dave's Antisub belt mount), I/O Port video mount, Snorkel delete, Shims out, Rearview Mirror delete, 2Bular 7X18, Pagid RS42's, Saiku Michi catch can and, of course, blingy carpet buttons. 08 M-B ML320 cdi, 08 Toyota Tundra SR5 5.7, 06 M-B E320 cdi, 02 Lexus LX470, 97 Bobcat 751C The Red Pill  Ignore Me  *Be sure too save your IL before browsing away
|
|
|
Linear Mode
