Removing rear side markers - LotusTalk

Quicker · 10-03-2009, 01:57 PM

Has anyone remove the rear side markers from their Esprit?

I have not spent a lot of time on this - but was able to get my finger on the backend of the housing - going in from the trunk.

I need to remove them - looking at adding fender flares and i'll need to relocate them a few inches back.

Simba · 10-03-2009, 03:38 PM

If you mean the rear marker lights in the bumper, they're pretty easy to remove. The lenses come out with a pair of screws and then the rest of the assembly pops out.

Quicker · 10-03-2009, 04:45 PM

the ones behind the rear wheels - on the side of the valiance/bumper.

I found this thread - > Yahoo! Groups

looks difficult...

10-03-2009, 01:57 PM	#1 (permalink)
Quicker 89 Esprit SE Join Date: Jan 2008 Location: Austin, TX Posts: 59	Removing rear side markers Has anyone remove the rear side markers from their Esprit? I have not spent a lot of time on this - but was able to get my finger on the backend of the housing - going in from the trunk. I need to remove them - looking at adding fender flares and i'll need to relocate them a few inches back. __________________ _____________ Lou Senko, Austin, TX Click to see 'Quik LS' my mean Lincoln LS Click to see 'Quiker' my Lotus Esprit SE

10-03-2009, 04:45 PM	#3 (permalink)
Quicker 89 Esprit SE Join Date: Jan 2008 Location: Austin, TX Posts: 59	the ones behind the rear wheels - on the side of the valiance/bumper. I found this thread - > Yahoo! Groups looks difficult... __________________ _____________ Lou Senko, Austin, TX Click to see 'Quik LS' my mean Lincoln LS Click to see 'Quiker' my Lotus Esprit SE

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-03-2009, 03:38 PM	#2 (permalink)
Simba 2/3 hp to the paws. Join Date: Jan 2008 Location: NY Posts: 497	If you mean the rear marker lights in the bumper, they're pretty easy to remove. The lenses come out with a pair of screws and then the rest of the assembly pops out.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)