Alternative turnsignal suggestions - LotusTalk

Minnis · 05-23-2009, 12:12 PM

I am in the process of filling in my turnsignals. I need suggestion as to where to relocate them to. I know Eddie has them in his headlights somehow (how?) but I was looking for other ideas too. I always wanted to do something like the Oreca Viper but not sure on the Elise. I've changed my front even more from the picture below but I could also add the LED turns from the Porsche- I found them as a kit. I could also put them as driving lights in the big mouth.. but small

Dragon · 05-23-2009, 01:19 PM

Mount something in the driving light locations in the mouth of the front end or you could use an LED strip in the upper oil cooler air duct.

Brennon · 05-23-2009, 01:52 PM

I've seen them integrated into the headlamp by installing LEDs in the bottom portion of it. Looks pretty sharp.

plastique999 · 05-23-2009, 02:06 PM

I simply used my DRL's .... switched out the bulb to amber, and it was wired to my turn signal wiring

RoadDad · 05-23-2009, 02:29 PM

Quote:

Originally Posted by Brennon

I've seen them integrated into the headlamp by installing LEDs in the bottom portion of it. Looks pretty sharp.

+1

Dig through this thread for the pics: another flat black

Noizemaker · 05-23-2009, 06:27 PM

My god, that looks awesome w/o completely biting off the Audi style, and the front looks so much better w/o the inner markers.

I tend to pride myself on doing mods nobody else has, but I think I need to do that one as well on my clam I'm working on.

Minnis · 05-24-2009, 04:05 PM

Thanks LED strip it is.

RoadDad · 05-24-2009, 05:24 PM

Good choice. You are required to post pics of the final product.

05-23-2009, 12:12 PM	#1 (permalink)
Minnis '010 Join Date: Sep 2007 Location: Vegas/Phila. Posts: 770 Images: 1	Alternative turnsignal suggestions I am in the process of filling in my turnsignals. I need suggestion as to where to relocate them to. I know Eddie has them in his headlights somehow (how?) but I was looking for other ideas too. I always wanted to do something like the Oreca Viper but not sure on the Elise. I've changed my front even more from the picture below but I could also add the LED turns from the Porsche- I found them as a kit. I could also put them as driving lights in the big mouth.. but small Attached Images

05-23-2009, 01:19 PM	#2 (permalink)
Dragon Hydrocarbons Rule Join Date: Sep 2007 Location: Okinawa Japan Posts: 1,742 Images: 2	Mount something in the driving light locations in the mouth of the front end or you could use an LED strip in the upper oil cooler air duct. __________________ 2006 Exige; BWR Supercharger, Adj Sway Bar, Ohlins Suspension, BSK Oil Catch Can, Moroso Oil Pan, ORC Clutch, Custom Exhaust, Black Volk Racing CE28N's w/ Toyo R1R's, 2 piece rotors, Pagid Blue Pads, BSK Wet Carbon (Side Skirts, Front Lip Spoiler, Gas Cap Cover, Center Console, Door Panels), Dry Carbon rear Diffuser, Harness Bar, BWR Gauge Mount, OMP Superquadro steering wheel, LETSLA Short Shifter, V2arms, Rear Tow Link Brace, RLS Battery Bracket, BOE Tow Bar, Stickers.

05-23-2009, 02:06 PM	#4 (permalink)
plastique999 Form and Function Join Date: May 2008 Location: Alta Loma, CA Posts: 3,045	I simply used my DRL's .... switched out the bulb to amber, and it was wired to my turn signal wiring __________________ www.FaceNBody.com 2005 Lotus Elise: 2bular decat\GT3 exhaust,HID's,turn signal&rear fins delete, CFside scoops, CFbinnacle,CFcenter console,Zoom CF mirror,APR Aero kit,CF 5-elem. diffuser,Exige mesh,Ohlins DA,RTD brace,RAC 'lites,Toyo R888's,HawkHT10's,CO painted calipers,SS lines,Reverie XC CF seat,Reverie CF steering wheel,Schroth Profi II 6 pt harness,shifter re-Enforcer,Manly mounts, Accusump,Moroso pan,BWR key to BWR S/C! Spec Racer Ford #237

05-23-2009, 06:27 PM	#6 (permalink)
Noizemaker General Freakin' Lee. :( Join Date: Jul 2008 Location: Bellevue WA Posts: 329	My god, that looks awesome w/o completely biting off the Audi style, and the front looks so much better w/o the inner markers. I tend to pride myself on doing mods nobody else has, but I think I need to do that one as well on my clam I'm working on. __________________ -Matt 05 Chrome Orange. Touring, LSS wheels, The Blue Sector111 radiator of doom, Dieselgeek 1/4 turn kit, 1/4din Oil Temp gauge, Starshield, LETSLA, HKS exhaust etc etc etc. 99 Neon ACR. Broken. 2.4l, T3/T4, T850 swap, SRT seats, etc etc etc.

05-24-2009, 05:24 PM	#8 (permalink)
RoadDad perfututum futūtor Join Date: Dec 2006 Posts: 6,019	Good choice. You are required to post pics of the final product. __________________ "Really, you want to maintain a semblance of professionalism since you represent Lotus. Me... I don't need to. Bite me." -Randy

05-23-2009, 01:52 PM	#3 (permalink)
Brennon Registered User Join Date: Nov 2006 Posts: 1,319	I've seen them integrated into the headlamp by installing LEDs in the bottom portion of it. Looks pretty sharp.

05-24-2009, 04:05 PM	#7 (permalink)
Minnis '010 Join Date: Sep 2007 Location: Vegas/Phila. Posts: 770 Images: 1	Thanks LED strip it is.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode