CF Freak II - LotusTalk

HKFEVER · 05-23-2012, 12:06 AM

Check these out and guess what are these for

Forgot to add pictures:

Instrument Cowling Cover only:

Side Air Vent Covers only:

Middle Air Vent Covers only:

RBH · 05-23-2012, 02:14 AM

Very nice. How much do they go for? I will email you my list later today....

HKFEVER · 05-23-2012, 06:07 AM

The attached picture is only trial fit, and need to improve the Cowling cover a little bit. The air vents seems A OK, and waiting for A117U6003F to arrive to have final fitting.

darkSol · 05-23-2012, 06:30 AM

Quote:

Originally Posted by HKFEVER

The attached picture is only trial fit, and need to improve the Cowling cover a little bit. The air vents seems A OK, and waiting for A117U6003F to arrive to have final fitting.

THAT is beautiful.

Gorkoracing · 05-23-2012, 06:52 AM

I like the air vent covers. Will you post a picture when you get some Matte ones in?
How do they attach to the car? The vent covers and the binnacle cover?

HKFEVER · 05-23-2012, 07:08 AM

Quote:

Originally Posted by Gorkoracing

I like the air vent covers. Will you post a picture when you get some Matte ones in?
How do they attach to the car? The vent covers and the binnacle cover?

I won't make any matt version at this moment, as I try to make it like "F" car with all the air vents in glossy CF.

Just simply small drops of silicon glue will do fine. Or may be a old chowing gum

as they just clip on perfectly.

S240 · 05-23-2012, 07:51 AM

Looking good bro.

lotus_dp · 05-23-2012, 09:14 AM

Why the extra lip on the binnacle cover? the part along the dash... Never seen it done that way before.

ErictheBastard · 05-23-2012, 09:18 AM

I'm in for the middle air vents as soon as they're available (should be a nice touch to tie in with the CF A-Post trim and side sills).

darkSol · 05-23-2012, 10:27 AM

Yeah I need all four vent covers - not two side and one integrated middle piece... but four separate covers. That and the door pulls from the first group buy

HKFEVER · 05-23-2012, 05:18 PM

Quote:

Originally Posted by lotus_dp

Why the extra lip on the binnacle cover? the part along the dash... Never seen it done that way before.

That's why I mentioned " need improve " in previous thread, the tech made the 2 extra wings without asking me.

shay2nak · 05-23-2012, 08:48 PM

wooow

HKFEVER · 05-23-2012, 10:20 PM

To finish the CF cover bits, I am desperately seeking for a deployed steering wheel airbag. Anyone can help? I will reward him/her good....

HKFEVER · 05-24-2012, 12:37 AM

This is finally ready to start production.

HKFEVER · 05-24-2012, 12:40 AM

This is also ready to start production:

Haha, I just pull some mould from my old Boxster

doug_porsche · 05-24-2012, 07:31 AM

I am thinking a CF cup holder. The car could use one, and it does not seem that complex.

HKFEVER · 05-24-2012, 07:37 AM

Quote:

Originally Posted by doug_porsche

I am thinking a CF cup holder. The car could use one, and it does not seem that complex.

I don't see any design is good enough for me

Not even the OEM holder.

300hpMR2 · 05-24-2012, 08:57 AM

Wasn't there a version where somebody integrated a cupholder into the center console?

yellow99s · 05-24-2012, 09:18 AM

Quote:

Originally Posted by 300hpMR2

Wasn't there a version where somebody integrated a cupholder into the center console?

Yeah, my version. I could send one to HK to pull a mold from.

darkSol · 05-24-2012, 01:14 PM

Quote:

Originally Posted by 300hpMR2

Wasn't there a version where somebody integrated a cupholder into the center console?

I like the one that someone originally did years ago that resided underneath the passenger seat when not being used and swung out against the side of the console (matching it's curves) when it was... I know that Chazz just made one out of plexiglass. It can't be that difficult

05-23-2012, 12:06 AM	#1 (permalink)
HKFEVER HK Lotus Mod Addict Join Date: Jan 2009 Location: Hong Kong Posts: 4,043	CF Freak II Check these out and guess what are these for Forgot to add pictures: Instrument Cowling Cover only: Side Air Vent Covers only: Middle Air Vent Covers only: __________________ S240 Exige S with Blade300 + over 40 mods CF FREAK, I am making my own CF now. Need CF parts email charles@wahyuen.com Too cheap to afford web site http://www.pbase.com/hkfever/carbon_fiber Last edited by HKFEVER; 05-23-2012 at 01:16 AM.

05-23-2012, 02:14 AM	#2 (permalink)
RBH Do it once. Do it right. Join Date: Oct 2010 Location: Northern VA Posts: 774 Images: 8	Very nice. How much do they go for? I will email you my list later today.... __________________ Do it once. Do it right. http://www.17of30.com YouTube: 170f30 *S260 Final Edition* RBH

05-23-2012, 06:07 AM	#3 (permalink)
HKFEVER HK Lotus Mod Addict Join Date: Jan 2009 Location: Hong Kong Posts: 4,043	Trial Fit The attached picture is only trial fit, and need to improve the Cowling cover a little bit. The air vents seems A OK, and waiting for A117U6003F to arrive to have final fitting. Attached Images __________________ S240 Exige S with Blade300 + over 40 mods CF FREAK, I am making my own CF now. Need CF parts email charles@wahyuen.com Too cheap to afford web site http://www.pbase.com/hkfever/carbon_fiber

05-23-2012, 06:52 AM	#5 (permalink)
Gorkoracing Registered User Join Date: Jan 2011 Location: Huntsville, AL Posts: 586 Images: 2	I like the air vent covers. Will you post a picture when you get some Matte ones in? How do they attach to the car? The vent covers and the binnacle cover? __________________ 06 Exige BRG - GB Composites CF fuel door, CF footrest RLS/HKFEVER Glossy CF front lip, Matte CF steering ring, door panels, door pulls, center console, lower console, ac surround, Stan's shifter reinforcement, Difflow Aeroplates, Front S111 sportINSERT, FTP CF side scoops, Jim-Clayton tow hook, Larini SE exhaust, TopSpeed rear panel eliminator, DDM HID kit w Trevor's Dual ring LED driving lights, Green Wire Mod, Snorkel Delete and K&N Air Filter

05-23-2012, 09:18 AM	#9 (permalink)
ErictheBastard Dept of Corrections Join Date: Feb 2009 Posts: 798 Images: 5	I'm in for the middle air vents as soon as they're available (should be a nice touch to tie in with the CF A-Post trim and side sills). __________________ Eric the Bastard, Esq. Sylmar, CA 2005 Chrome Orange Buzzbomb Larini SE Exhaust LETSLA shift kit Exige Seats LSS Wheels Lift Point Kit and Jack Helper Difflow 5-Element Diffusor

05-23-2012, 07:51 AM	#7 (permalink)
S240 Registered User Join Date: Mar 2012 Location: SIN city Posts: 60	Looking good bro.

05-23-2012, 09:14 AM	#8 (permalink)
lotus_dp Registered User Join Date: Jul 2011 Location: Austin, TX Posts: 282	Why the extra lip on the binnacle cover? the part along the dash... Never seen it done that way before.

05-23-2012, 08:48 PM	#12 (permalink)
shay2nak Noways iz sittin outsides Join Date: Dec 2003 Location: Calipornia Posts: 20,933	wooow __________________ save ~10 lbs gain 1 hp EQ: Y=(190*X) / (1984-X) where Y is (HP) and X is (lbs) '07 Lotus Exige S310 WTC 2

05-23-2012, 10:20 PM	#13 (permalink)
HKFEVER HK Lotus Mod Addict Join Date: Jan 2009 Location: Hong Kong Posts: 4,043	To finish the CF cover bits, I am desperately seeking for a deployed steering wheel airbag. Anyone can help? I will reward him/her good.... __________________ S240 Exige S with Blade300 + over 40 mods CF FREAK, I am making my own CF now. Need CF parts email charles@wahyuen.com Too cheap to afford web site http://www.pbase.com/hkfever/carbon_fiber

05-24-2012, 12:37 AM	#14 (permalink)
HKFEVER HK Lotus Mod Addict Join Date: Jan 2009 Location: Hong Kong Posts: 4,043	CF Side Mirror Covers This is finally ready to start production. __________________ S240 Exige S with Blade300 + over 40 mods CF FREAK, I am making my own CF now. Need CF parts email charles@wahyuen.com Too cheap to afford web site http://www.pbase.com/hkfever/carbon_fiber

05-24-2012, 12:40 AM	#15 (permalink)
HKFEVER HK Lotus Mod Addict Join Date: Jan 2009 Location: Hong Kong Posts: 4,043	Foot Divider This is also ready to start production: Haha, I just pull some mould from my old Boxster __________________ S240 Exige S with Blade300 + over 40 mods CF FREAK, I am making my own CF now. Need CF parts email charles@wahyuen.com Too cheap to afford web site http://www.pbase.com/hkfever/carbon_fiber

05-24-2012, 07:31 AM	#16 (permalink)
doug_porsche Thanks Pepper Join Date: Jun 2008 Location: 38th state Posts: 1,634	I am thinking a CF cup holder. The car could use one, and it does not seem that complex. __________________ Enjoying Lotus performance because of its nature, not because of its quantity it isn't that i'm not a people person, I'm just not a stupid people person!

05-24-2012, 08:57 AM	#18 (permalink)
300hpMR2 Not a poseur anymore! Join Date: Jul 2007 Location: Orange County, CA Posts: 864	Wasn't there a version where somebody integrated a cupholder into the center console? __________________ 07 Phantom Black Exige S - TP/TP/TC/SS Happiness is adding modifications!!!

Remove Advertisements Sponsored Links
Lotus Talk Advertisement

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode