Custom make CF Exige Access Panels - Page 2 - LotusTalk

HKFEVER · 11-09-2012, 07:22 AM

The cost of moulds are too high, sorry guys, I wish I can lower the price.

HKFEVER · 11-09-2012, 07:33 AM

Send me an Exige Splitter, then I will make one with additional blade for it. Haha

RBH · 11-19-2012, 03:11 AM

Any updates on these?

HKFEVER · 11-19-2012, 03:58 AM

Quote:

Originally Posted by RBH

Any updates on these?

Well received the parts from the donator

Waiting to quotaion and time frame.

RBH · 11-26-2012, 01:00 AM

Quote:

Originally Posted by HKFEVER

Well received the parts from the donator

Waiting to quotaion and time frame.

Great

HKFEVER · 11-26-2012, 02:21 AM

Quote:

Originally Posted by RBH

Great

First batch only 5 sets:
1 for 12K
3 for 6K
1 for 3K

All in CF and glossy.

Gorkoracing · 11-26-2012, 04:45 AM

how much and will you be making them in matte in the future?

HKFEVER · 11-26-2012, 05:43 AM

Humm, I am not sure how much to charge, since it is in very small volumn:

First 5 sets:
CF = USD415 + USD55 shipping
CF+G = USD400 shipped

I can have these frist 5 in Matte or Glossy, as you wish.

Gorkoracing · 11-26-2012, 10:02 AM

Are these the stock look or with the fins?

300hpMR2 · 11-26-2012, 12:27 PM

I assume there isn't much of a weight difference between the two versions?

(Sorry, it's very difficult to add lightness to myself so I have to do so to the car. hahaha!)

RBH · 11-26-2012, 12:37 PM

1 X CF = USD415 + USD55 (6K CF) Glossy

HKFEVER · 11-27-2012, 06:48 AM

Quote:

Originally Posted by Gorkoracing

Are these the stock look or with the fins?

No fins, fins look stupid.

The original Lotus design is just too fine.

Gorkoracing · 11-27-2012, 11:27 AM

Quote:

Originally Posted by HKFEVER

No fins, fins look stupid.

The original Lotus design is just too fine.

Agreed!

300hpMR2 · 11-27-2012, 02:06 PM

Quote:

Originally Posted by HKFEVER

No fins, fins look stupid.

The original Lotus design is just too fine.

Didn't someone have a version that has a small lip on the rear edge? How does that look when installed?

RBH · 12-28-2012, 11:06 AM

How are these going?

HKFEVER · 12-28-2012, 11:26 PM

Should be very soon. I just forgot to check due to the holiday mood, LOL

TheExigentOne · 12-29-2012, 01:19 AM

my car came with these... 2 ribs looks dumb in my opinion... i've highly considered remaking them myself and adding a third rib... idk...

Detail Album

HKFEVER · 12-30-2012, 11:14 PM

5 sets arrive today:
1. 1 set 6K is for RAXXXL

2. 1 set 12K is for me

3. The rest 3 sets is for .....

Email me if interested.

RBH · 12-31-2012, 03:26 AM

Quote:

Originally Posted by HKFEVER

5 sets arrive today:
1. 1 set 6K is for RAXXXL

2. 1 set 12K is for me

3. The rest 3 sets is for .....

Email me if interested.

Can't wait to get them.

Happy New Year!

Are you able to post some pictures?

HKFEVER · 12-31-2012, 04:53 AM

Pictures, not until 2nd of 2013.

Finally have time for this:

12K vs 6K:

11-09-2012, 07:22 AM	#21 (permalink)
HKFEVER HK Lotus Mod Addict Join Date: Jan 2009 Location: Hong Kong Posts: 3,970	The cost of moulds are too high, sorry guys, I wish I can lower the price. __________________ S240 Exige S with Blade300 + over 40 mods CF FREAK, I am making my own CF now. Need CF parts email charles@wahyuen.com Too cheap to afford web site http://www.pbase.com/hkfever/carbon_fiber Last edited by HKFEVER; 11-09-2012 at 07:34 AM.

11-09-2012, 07:33 AM	#22 (permalink)
HKFEVER HK Lotus Mod Addict Join Date: Jan 2009 Location: Hong Kong Posts: 3,970	Send me an Exige Splitter, then I will make one with additional blade for it. Haha __________________ S240 Exige S with Blade300 + over 40 mods CF FREAK, I am making my own CF now. Need CF parts email charles@wahyuen.com Too cheap to afford web site http://www.pbase.com/hkfever/carbon_fiber

11-19-2012, 03:11 AM	#23 (permalink)
RBH Do it once. Do it right. Join Date: Oct 2010 Location: Northern VA Posts: 770 Images: 8	Any updates on these? __________________ Do it once. Do it right. http://www.17of30.com YouTube: 170f30 *S260 Final Edition* RBH

11-26-2012, 04:45 AM	#27 (permalink)
Gorkoracing Registered User Join Date: Jan 2011 Posts: 574 Images: 2	how much and will you be making them in matte in the future? __________________ 06 Exige BRG - RLS/HKFEVER Glossy CF front lip, Matte CF steering ring, door panels, door pulls, center console, lower console, ac surround, Stan's shifter reinforcement, Difflow Aeroplates, Front S111 sportINSERT, FTP CF side scoops, Jim-Clayton tow hook, Larini SE exhaust, TopSpeed rear panel eliminator, DDM HID kit w Trevor's Dual ring LED driving lights, Green Wire Mod, Snorkel Delete and K&N Air Filter

11-26-2012, 05:43 AM	#28 (permalink)
HKFEVER HK Lotus Mod Addict Join Date: Jan 2009 Location: Hong Kong Posts: 3,970	Humm, I am not sure how much to charge, since it is in very small volumn: First 5 sets: CF = USD415 + USD55 shipping CF+G = USD400 shipped I can have these frist 5 in Matte or Glossy, as you wish. __________________ S240 Exige S with Blade300 + over 40 mods CF FREAK, I am making my own CF now. Need CF parts email charles@wahyuen.com Too cheap to afford web site http://www.pbase.com/hkfever/carbon_fiber

11-26-2012, 10:02 AM	#29 (permalink)
Gorkoracing Registered User Join Date: Jan 2011 Posts: 574 Images: 2	Are these the stock look or with the fins? __________________ 06 Exige BRG - RLS/HKFEVER Glossy CF front lip, Matte CF steering ring, door panels, door pulls, center console, lower console, ac surround, Stan's shifter reinforcement, Difflow Aeroplates, Front S111 sportINSERT, FTP CF side scoops, Jim-Clayton tow hook, Larini SE exhaust, TopSpeed rear panel eliminator, DDM HID kit w Trevor's Dual ring LED driving lights, Green Wire Mod, Snorkel Delete and K&N Air Filter

11-26-2012, 12:27 PM	#30 (permalink)
300hpMR2 Not a poseur anymore! Join Date: Jul 2007 Location: Orange County, CA Posts: 859	I assume there isn't much of a weight difference between the two versions? (Sorry, it's very difficult to add lightness to myself so I have to do so to the car. hahaha!) __________________ 07 Phantom Black Exige S - TP/TP/TC/SS Happiness is adding modifications!!!

11-26-2012, 12:37 PM	#31 (permalink)
RBH Do it once. Do it right. Join Date: Oct 2010 Location: Northern VA Posts: 770 Images: 8	1 X CF = USD415 + USD55 (6K CF) Glossy __________________ Do it once. Do it right. http://www.17of30.com YouTube: 170f30 *S260 Final Edition* RBH

12-28-2012, 11:06 AM	#35 (permalink)
RBH Do it once. Do it right. Join Date: Oct 2010 Location: Northern VA Posts: 770 Images: 8	How are these going? __________________ Do it once. Do it right. http://www.17of30.com YouTube: 170f30 *S260 Final Edition* RBH

12-28-2012, 11:26 PM	#36 (permalink)
HKFEVER HK Lotus Mod Addict Join Date: Jan 2009 Location: Hong Kong Posts: 3,970	Should be very soon. I just forgot to check due to the holiday mood, LOL __________________ S240 Exige S with Blade300 + over 40 mods CF FREAK, I am making my own CF now. Need CF parts email charles@wahyuen.com Too cheap to afford web site http://www.pbase.com/hkfever/carbon_fiber

12-29-2012, 01:19 AM	#37 (permalink)
TheExigentOne Registered User Join Date: Mar 2012 Location: Orange, Ca Posts: 100	my car came with these... 2 ribs looks dumb in my opinion... i've highly considered remaking them myself and adding a third rib... idk... Detail Album

12-30-2012, 11:14 PM	#38 (permalink)
HKFEVER HK Lotus Mod Addict Join Date: Jan 2009 Location: Hong Kong Posts: 3,970	Arrived 5 sets arrive today: 1. 1 set 6K is for RAXXXL 2. 1 set 12K is for me 3. The rest 3 sets is for ..... Email me if interested. __________________ S240 Exige S with Blade300 + over 40 mods CF FREAK, I am making my own CF now. Need CF parts email charles@wahyuen.com Too cheap to afford web site http://www.pbase.com/hkfever/carbon_fiber

12-31-2012, 04:53 AM	#40 (permalink)
HKFEVER HK Lotus Mod Addict Join Date: Jan 2009 Location: Hong Kong Posts: 3,970	Pictures, not until 2nd of 2013. Finally have time for this: 12K vs 6K: __________________ S240 Exige S with Blade300 + over 40 mods CF FREAK, I am making my own CF now. Need CF parts email charles@wahyuen.com Too cheap to afford web site http://www.pbase.com/hkfever/carbon_fiber Last edited by HKFEVER; 01-02-2013 at 10:04 PM.

Remove Advertisements Sponsored Links
Lotus Talk Advertisement

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode