Exterior Modifications Thread - Page 3 - LotusTalk

perryeyges · 02-23-2008, 10:12 AM

Quote:

Originally Posted by 33truballa33

Your google is weak

http://www.twauto.com.hk/ I sent an email to see if they will sell to the states and a PM so hopefully one of those gets answered

I did find their site as well using google but it was pretty slow and I couldn't find any listed Lotus product on it. Maybe I was too impatient..

33truballa33 · 02-23-2008, 10:16 AM

Yeah its super slow. All I saw were the pics that were posted on here and some contact information that I took down and sent out an email. Hopefully they will respond soon.

perryeyges · 02-23-2008, 11:09 AM

I finally found the latches that I was looking for to use on my rear clam once it is set up with Turbophil's hinges. I will mount them just aft of the doors on the 1/4 panel ledge next to the "C" pillar.
I saw them on the Cadena and the 211. VERY NICE!!

Now, to lock or not to lock???

33truballa33 · 02-23-2008, 07:31 PM

He replied to the email. He said around 5k for the kit minus the wing. And its only for the exige, it is not yet available for the Elise

perryeyges · 02-26-2008, 01:51 PM

Don't forget about the < S H I P P I N G > costs, AND the later to arrive DUTY charges!! I used to buy from Lotusparts.com in the UK. It was a few months later when I started receving my DUTY charges that I started to say WHOA NELLIE, WTF!

33truballa33 · 02-26-2008, 02:19 PM

Good call. Hopefully in the next couple of years we can have a domestic kit for sale. If not I might have a shop do mine in a year or two. Once I get settled into a new house.

Bgwilly31 · 02-27-2008, 11:48 AM

Quote:

Originally Posted by perryeyges

A few shots for the record.. Lightened and maxed out brakes. Rollbar cover removed. Trunk removed. Rear of car cut out for air flow. Engine cover w-vents. Vents cut into front fenders and rear 1/4's. Gurney Lip(from Por 997 GT3). Etc..

can you point me to more info on these brakes???

Thanks

perryeyges · 02-27-2008, 01:21 PM

Quote:

Originally Posted by Bgwillyelise

can you point me to more info on these brakes???

Thanks

First you need a ForcedFed/Stasis Alcon big brake kit along with the optional rear rotors/hats(may need to change front wheel size, 17" as well). You then send/take the brakes to Designit Prototype in Rhonert Park, Ca.. They can dis-assemble the hats from the rotors and re-attach(and charge you) them once the CNC Mill work has been completed. You can dis-assemble and re-assemble them yourself if you want to save a few bucks(I did mine myself). They cut rotors like these for a number of Sprint Car teams.
Call Tammy at (707)584-4000 @ Design It Prototype

Carpe | Viam · 05-02-2008, 10:34 PM

Update ladies and gentlemen. As of this moment, I have updated the original post to this thread and now have included over 25 aftermarket exterior modification examples for your entertainment. The pictures, being much larger may need time to load (photobucket success?) but once done should be a big improvement over the 2007 post. Feel free to bookmark it for reference later!

FLuXeXigeS · 05-03-2008, 01:45 AM

subscribed...thanx

Lightning · 05-05-2008, 02:47 PM

What front splitter/lip is that on Ronin's elise!? It's really clean looking.

shay2nak · 05-06-2008, 08:43 PM

wow looks great

Bender Unit · 06-11-2008, 04:25 PM

Carpe | Viam: Thank You for this thread. Save alot of time to search.

perryeyges: Your Brake Kit is Awesome. Unbelievable.>>

FLuXeXigeS · 06-12-2008, 12:37 AM

love those "flower" looking brakes if possible please PM me with more details

TIA

GoGo Geek · 06-12-2008, 05:45 PM

Wondering what your opinions are regarding my mods to this 06 Elise...

shay2nak · 06-13-2008, 07:50 PM

S1 exige wing?

Carpe | Viam · 06-13-2008, 11:31 PM

GoGoGeek: Big fan of the series one accessories, as well as the blacked out rear-tailight portion. The car looks solid, any other plans for it in the future?

Lightning: Ronin's front spoiler was a prototype piece purchased through sector 111 a few years ago (along with the side skirts). Both resemble the kind that LTS Denag in Japan carries. Contact Sector 111 for more information regarding getting one in the states

Coi: Perry posted the information about his brakes in the post above, check it out:

Quote:

You need a ForcedFed/Stasis Alcon big brake kit along with the optional rear rotors/hats(may need to change front wheel size, 17" as well). You then send/take the brakes to Designit Prototype in Rhonert Park, Ca.. They can dis-assemble the hats from the rotors and re-attach(and charge you) them once the CNC Mill work has been completed. You can dis-assemble and re-assemble them yourself if you want to save a few bucks(I did mine myself). They cut rotors like these for a number of Sprint Car teams.
Call Tammy at (707)584-4000 @ Design It Prototype

Thanks for the awesome support for this thread

FLuXeXigeS · 06-13-2008, 11:40 PM

thanx

GoGo Geek · 06-21-2008, 09:14 PM

Just a few more pictures for you now that I have trimmed my wheels and added my CF Front splitter...

andrewgotanelise · 06-22-2008, 02:33 AM

minus the pinstripe and the wing it looks great!

02-23-2008, 10:16 AM	#42 (permalink)
33truballa33 is it supposed to squeek? Join Date: Jan 2007 Location: Tacoma Posts: 549	Yeah its super slow. All I saw were the pics that were posted on here and some contact information that I took down and sent out an email. Hopefully they will respond soon. __________________ 05 Ardent Red Built by Perrin Peformance 260rwhp 190ft lbs of tq, FF'd Spoiler and Wing, Tinted side repeaters, LED Tail upgrade Need to install: V1 Mount, Headlight smoke kit, Taillight smoke kit. HIDs

02-23-2008, 11:09 AM	#43 (permalink)
perryeyges XPRMTL Join Date: May 2004 Location: Berzerkley Posts: 2,820	I finally found the latches that I was looking for to use on my rear clam once it is set up with Turbophil's hinges. I will mount them just aft of the doors on the 1/4 panel ledge next to the "C" pillar. I saw them on the Cadena and the 211. VERY NICE!! Now, to lock or not to lock??? Attached Images __________________ 05 Elise Spyder II, Chrome Orange, 1586lbs. Stasis/Alcon "lotus cut" brakes, Supercharged and Intercooled @305 Crank HP "My dream car is now operational!" Last edited by perryeyges : 02-27-2008 at 01:48 PM.

02-23-2008, 07:31 PM	#44 (permalink)
33truballa33 is it supposed to squeek? Join Date: Jan 2007 Location: Tacoma Posts: 549	He replied to the email. He said around 5k for the kit minus the wing. And its only for the exige, it is not yet available for the Elise __________________ 05 Ardent Red Built by Perrin Peformance 260rwhp 190ft lbs of tq, FF'd Spoiler and Wing, Tinted side repeaters, LED Tail upgrade Need to install: V1 Mount, Headlight smoke kit, Taillight smoke kit. HIDs

02-26-2008, 01:51 PM	#45 (permalink)
perryeyges XPRMTL Join Date: May 2004 Location: Berzerkley Posts: 2,820	Don't forget about the < S H I P P I N G > costs, AND the later to arrive DUTY charges!! I used to buy from Lotusparts.com in the UK. It was a few months later when I started receving my DUTY charges that I started to say WHOA NELLIE, WTF! __________________ 05 Elise Spyder II, Chrome Orange, 1586lbs. Stasis/Alcon "lotus cut" brakes, Supercharged and Intercooled @305 Crank HP "My dream car is now operational!"

02-26-2008, 02:19 PM	#46 (permalink)
33truballa33 is it supposed to squeek? Join Date: Jan 2007 Location: Tacoma Posts: 549	Good call. Hopefully in the next couple of years we can have a domestic kit for sale. If not I might have a shop do mine in a year or two. Once I get settled into a new house. __________________ 05 Ardent Red Built by Perrin Peformance 260rwhp 190ft lbs of tq, FF'd Spoiler and Wing, Tinted side repeaters, LED Tail upgrade Need to install: V1 Mount, Headlight smoke kit, Taillight smoke kit. HIDs

05-02-2008, 10:34 PM	#49 (permalink)
Carpe \| Viam Aeternum Vale Join Date: May 2007 Location: Redwood City, CA / Lake Forest, IL Posts: 75	Update ladies and gentlemen. As of this moment, I have updated the original post to this thread and now have included over 25 aftermarket exterior modification examples for your entertainment. The pictures, being much larger may need time to load (photobucket success?) but once done should be a big improvement over the 2007 post. Feel free to bookmark it for reference later! __________________ *Carpe Viam "Seize the Road"*

05-03-2008, 01:45 AM	#50 (permalink)
FLuXeXigeS ...disappearing posts... Join Date: Jul 2007 Location: SoCal/AZ/NV Posts: 4,281	subscribed...thanx __________________ -Coi-'07 AR Exige S+Gotham, Von Hep, corner balanced&tuned SACHS, 6k HID, JVC KD-NX5000, Alpine 4ch. amp, JL stealth box, s111 rear towhook and harness bar, Starshield, TG4 1/4 turn fasteners, SS brake lines, bling bling eng bay, painted calipers, TD 1.2 wheels w/ Toyo R888, Safecraft harnesses, DRL delete, s111 CRD mount. add me: www.myspace.com/kandyredcoi & lotuscar.ning.com/profile/KandyRedCoi

05-05-2008, 02:47 PM	#51 (permalink)
Lightning Registered User Join Date: Dec 2007 Posts: 22	What front splitter/lip is that on Ronin's elise!? It's really clean looking.

05-06-2008, 08:43 PM	#52 (permalink)
shay2nak GGM ENFORCER Join Date: Dec 2003 Location: Land of da 1000 Oaks, CA Posts: 12,655	wow looks great __________________ save ~10 lbs gain 1 hp EQ: Y=(190X) / (1984-X) where Y is (HP) and X is (lbs) '07 GG EXIGE S * MY CAR ** VIDEO CLIPS! '08 ACURA TSX 6-speed http://www.makeNYNYagain.com

06-11-2008, 04:25 PM	#53 (permalink)
Bender Unit RS member Join Date: May 2008 Location: Vancouver Posts: 70	Carpe \| Viam: Thank You for this thread. Save alot of time to search. perryeyges: Your Brake Kit is Awesome. Unbelievable.>> Last edited by Bender Unit : 06-11-2008 at 04:38 PM.

06-12-2008, 12:37 AM	#54 (permalink)
FLuXeXigeS ...disappearing posts... Join Date: Jul 2007 Location: SoCal/AZ/NV Posts: 4,281	love those "flower" looking brakes if possible please PM me with more details TIA __________________ -Coi-'07 AR Exige S+Gotham, Von Hep, corner balanced&tuned SACHS, 6k HID, JVC KD-NX5000, Alpine 4ch. amp, JL stealth box, s111 rear towhook and harness bar, Starshield, TG4 1/4 turn fasteners, SS brake lines, bling bling eng bay, painted calipers, TD 1.2 wheels w/ Toyo R888, Safecraft harnesses, DRL delete, s111 CRD mount. add me: www.myspace.com/kandyredcoi & lotuscar.ning.com/profile/KandyRedCoi

06-12-2008, 05:45 PM	#55 (permalink)
GoGo Geek Registered User Join Date: Mar 2008 Posts: 10	Do you like this rear wing and Black Tush Wondering what your opinions are regarding my mods to this 06 Elise... Attached Images

06-13-2008, 07:50 PM	#56 (permalink)
shay2nak GGM ENFORCER Join Date: Dec 2003 Location: Land of da 1000 Oaks, CA Posts: 12,655	S1 exige wing? __________________ save ~10 lbs gain 1 hp EQ: Y=(190X) / (1984-X) where Y is (HP) and X is (lbs) '07 GG EXIGE S * MY CAR ** VIDEO CLIPS! '08 ACURA TSX 6-speed http://www.makeNYNYagain.com

06-13-2008, 11:40 PM	#58 (permalink)
FLuXeXigeS ...disappearing posts... Join Date: Jul 2007 Location: SoCal/AZ/NV Posts: 4,281	thanx __________________ -Coi-'07 AR Exige S+Gotham, Von Hep, corner balanced&tuned SACHS, 6k HID, JVC KD-NX5000, Alpine 4ch. amp, JL stealth box, s111 rear towhook and harness bar, Starshield, TG4 1/4 turn fasteners, SS brake lines, bling bling eng bay, painted calipers, TD 1.2 wheels w/ Toyo R888, Safecraft harnesses, DRL delete, s111 CRD mount. add me: www.myspace.com/kandyredcoi & lotuscar.ning.com/profile/KandyRedCoi

06-21-2008, 09:14 PM	#59 (permalink)
GoGo Geek Registered User Join Date: Mar 2008 Posts: 10	Just a few more pictures for you now that I have trimmed my wheels and added my CF Front splitter... Attached Images

06-22-2008, 02:33 AM	#60 (permalink)
andrewgotanelise MMA Fighter Join Date: Apr 2007 Location: Where the drugs are cheap and the girls are easy Posts: 1,093	minus the pinstripe and the wing it looks great! __________________ 05 NFB Elise / Katana SC / No Snorkle / 3.2 "10" psi pulley / Stage 1 Exhaust / Decat / Green Filter

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode