Laser Cut Rear Block Out Panel - LotusTalk

Markuus · 09-02-2009, 05:12 PM

Hellooo All,

Just wanted to post the blockout panel I made for the back of my elise. It is not for sale (yet). I wanted to get some feedback on it... I also CAD'd up an open back that trims out the edges all the way around, and some with a 1" drop to the rear splitter....thoughts comments, snickering from the backrow?

BTW it bolts right in using all the stock locations, and yes the heat shield can be removed (I blacked mine out).

-m

Randy Chase · 09-02-2009, 05:14 PM

IMO... it needs to be black.

alil'britdifferent · 09-02-2009, 05:25 PM

Quote:

Originally Posted by Randy Chase

IMO... it needs to be black.

+1 x 1000

Can anyone p'chop it?

Markuus · 09-02-2009, 05:35 PM

good op: blackout.

sorry cannot catch the-

"+1 x 1000

Can anyone p'chop it?"

I know I can P'chop it....at least thats what the girls say.

alil'britdifferent · 09-02-2009, 05:43 PM

Translation...........I strongly agree with Randy and was wondering if anyone cared to photoshop the panel in black.

apk919 · 09-02-2009, 05:51 PM

I'm no Photoshop expert, but...

Vishus_1 · 09-02-2009, 06:10 PM

I don't really care for the triangles - I don't see that shape really picked up anywhere else.

I do like the idea of the diffuser being lowered some - although it is hard to tell in the picture. Is there a benefit to that?

apk919 · 09-02-2009, 06:13 PM

Quote:

Originally Posted by Vishus_1

I don't really care for the triangles - I don't see that shape really picked up anywhere else.

I do like the idea of the diffuser being lowered some - although it is hard to tell in the picture. Is there a benefit to that?

I actually think flattening the diffuser hurts downforce/drag... the diffuser is supposed to act as the end of a venturi... so it needs to swoop upward.

Markuus · 09-02-2009, 06:40 PM

Good comments. The other styles do not have the triangles in them. I just liked the truss look. The trim version just has an edge and also a integrated center spar.

I will cut the other patterns out and post them.

Now in terms of lowering the diffuser, the proportions of the car really need it. The rear of the Elise has bad vertical proportions. By adding the 1" drop to the diffuser the car looks closer to the ground and also a lot more aggressive.

The greenhouse in rear view is wonky and the tumble is so so.

Also the air gap and lack of tire width on the rear view of the car are the one view that is less compelling.

In terms of performance agreed: at most speeds it would not be improved just look coolio.

shokwaves · 09-02-2009, 06:46 PM

I'll pass.

Markuus · 09-02-2009, 06:48 PM

inspiration: sorry not on the elise. It should have been more like ovals or something.

Vishus_1 · 09-02-2009, 06:48 PM

Quote:

Originally Posted by apk919

I actually think flattening the diffuser hurts downforce/drag... the diffuser is supposed to act as the end of a venturi... so it needs to swoop upward.

Oh well then no this doesn't seem like a good idea.

Nix that.

FIL · 09-02-2009, 07:55 PM

Definitely needs to be black. Mesh inserts on the inside to plug up the gaps between the triangles would be cool. The triangles are okay, but not crazy about them.

sleepe · 09-02-2009, 09:26 PM

It looks rediculous

shay2nak · 09-02-2009, 09:31 PM

Quote:

Originally Posted by Markuus

I also CAD'd up an open back that trims out the edges all the way around, and some with a 1" drop to the rear splitter

this one would look better.

09-02-2009, 05:12 PM	#1 (permalink)
Markuus Registered User Join Date: Oct 2007 Posts: 31	Laser Cut Rear Block Out Panel Hellooo All, Just wanted to post the blockout panel I made for the back of my elise. It is not for sale (yet). I wanted to get some feedback on it... I also CAD'd up an open back that trims out the edges all the way around, and some with a 1" drop to the rear splitter....thoughts comments, snickering from the backrow? BTW it bolts right in using all the stock locations, and yes the heat shield can be removed (I blacked mine out). -m

09-02-2009, 05:14 PM	#2 (permalink)
Randy Chase Registered User Join Date: Apr 2002 Location: San Diego and where ever the roads lead Posts: 28,175 Images: 761	IMO... it needs to be black. __________________ * V E R I T A S * A E Q U I T A S * No Longer the ADMIN here, please do not PM me asking for help. Thanks! http://www.facebook.com/randychase 1991 Toyota MR2. AutoX Beast 2006 Noble M400. Track weapon. 2009 Rossion Q1. Monaco Orange. Canyon Carver. In build: 2009 Toniq R (300whp? 1100 pounds?). Chrome Orange. Lexus GX-470 tow vehicle. On Order: Lotus Evora Next: McLaren MP4-12C

09-02-2009, 05:35 PM	#4 (permalink)
Markuus Registered User Join Date: Oct 2007 Posts: 31	black out good op: blackout. sorry cannot catch the- "+1 x 1000 Can anyone p'chop it?" I know I can P'chop it....at least thats what the girls say.

09-02-2009, 05:43 PM	#5 (permalink)
alil'britdifferent English Exile Join Date: Oct 2007 Location: Fort Mill, SC Posts: 1,092	Translation...........I strongly agree with Randy and was wondering if anyone cared to photoshop the panel in black. __________________ 2005 Elise: Starlight Black - Touring & Sport Pack Faster, Lighter, Safer: Nitron Sport Pro - Lotus Sport ECU - RTD Brace - Braille Battery - K40 anti-Radar/Laser - 4Tress Bar - Schroth 5P Harness' - Fire Ext'r - SS brake lines Audio: Alpine - JBL Speakers - Arqray Double Tip Exhaust w/ Sport Cat - Desnorkel/Green Visual: Hard top - Challenger Rear Grill - Carbon Fiber; Diffuser, Front Splitter & Side Scoops - Stealth Bulbs - Folding Tow Hook, Bootie, Mircomirror & Buttons

09-02-2009, 05:51 PM	#6 (permalink)
apk919 ΒÄŅNED Join Date: Oct 2007 Location: Limbo Posts: 6,281 Images: 20	I'm no Photoshop expert, but... Attached Images __________________ * 2009 Lotus Challenge Series Rookie Of The Year * (Thanks Jim, Tom, Jack, Rob & Spring Mountain Motorsports Ranch!) My videos: http://www.youtube.com/user/apk919

09-02-2009, 06:10 PM	#7 (permalink)
Vishus_1 Super charged! Join Date: Dec 2006 Location: Missouri Posts: 1,038 Images: 62	I don't really care for the triangles - I don't see that shape really picked up anywhere else. I do like the idea of the diffuser being lowered some - although it is hard to tell in the picture. Is there a benefit to that? __________________ 2009 Exige 260 SPORT - Chrome Orange / Carbon Fiber / Black with the mustache Purchased through St Louis Motorsports

09-02-2009, 06:40 PM	#9 (permalink)
Markuus Registered User Join Date: Oct 2007 Posts: 31	Good comments. The other styles do not have the triangles in them. I just liked the truss look. The trim version just has an edge and also a integrated center spar. I will cut the other patterns out and post them. Now in terms of lowering the diffuser, the proportions of the car really need it. The rear of the Elise has bad vertical proportions. By adding the 1" drop to the diffuser the car looks closer to the ground and also a lot more aggressive. The greenhouse in rear view is wonky and the tumble is so so. Also the air gap and lack of tire width on the rear view of the car are the one view that is less compelling. In terms of performance agreed: at most speeds it would not be improved just look coolio.

09-02-2009, 06:46 PM	#10 (permalink)
shokwaves Registered User Join Date: Apr 2006 Location: Carson, California Posts: 1,018	I'll pass.

09-02-2009, 06:48 PM	#11 (permalink)
Markuus Registered User Join Date: Oct 2007 Posts: 31	inspiration: sorry not on the elise. It should have been more like ovals or something.

09-02-2009, 07:55 PM	#13 (permalink)
FIL Serial Thrilla Join Date: Jun 2006 Posts: 236	Definitely needs to be black. Mesh inserts on the inside to plug up the gaps between the triangles would be cool. The triangles are okay, but not crazy about them. __________________ 05' Elise - BWR supercharger, Quaife LSD, Nitron Race Triple Adjustable, LETSLA, Larini Decat, Larini Exhuast, ACT HDSS, Fidanza flywheel, V2 Fuel Tank, V2 Steering Arms, BWR sway bar, desnorkled, ForcedFed CF splitter, Manly's engine mounts, S111 harness bar, Schroth harness w/ S111 seat grommets, Oil Drain Valve, Painted Black Diffuser, Braille battery, Custom Battery Switch 05' Corvette - Z51 Convertible - 630hp 6.6L [DON'T YOU JUDGE ME!!!] (SOLD!)

09-02-2009, 09:26 PM	#14 (permalink)
sleepe Registered User Join Date: Jan 2007 Location: Rehoboth Beach, DE Posts: 1,050	It looks rediculous __________________ Elise'06ST:RAC/r888-Ultradiscs-Larini 8"-Braille-Saikou Michi cans-Nitron sportpro-RTVbrace-widened undertrays-manly's motor inserts-FF engine damper VF2

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode