Really Light Stuff - Elise Exige Scoop Kit by NCI - Page 3 - LotusTalk

Ripple · 07-01-2009, 12:01 PM

Yup got the instruction last night from Thomas, talk about great customer service. Thanks again for getting those out to me.

I got them in last night and the install was pretty easy. I had already done it prior to getting the instruction but now that I have them, I'm going to go back and adjust them so they fit better.

kmt63 · 07-01-2009, 04:49 PM

good to here ripple.that is a load off my mind knowing that these are not so bad to install.its easy for me.but i have done it many times now.

kmt63 · 07-04-2009, 09:33 AM

anyone have any pics of installed scoops?

MightyMike · 07-04-2009, 09:43 AM

I'm going to install mine next week; getting clear bra applied to scoops intake and side skirts now. I'll post pics then.

Arnie · 07-08-2009, 04:10 PM

Got mine yesterday, great stuff, can't believe even the allen key is included in the kit!! All I need now is my car, it's at the dealer having the AC fixed

Thomas, if by any chance you read this, please check pm for my email address, I'm not smart enough to do the install without instruction. Cheers!!

Thomasio · 07-08-2009, 04:41 PM

Quote:

Originally Posted by Arnie

Got mine yesterday, great stuff, can't believe even the allen key is included in the kit!! All I need now is my car, it's at the dealer having the AC fixed

Thomas, if by any chance you read this, please check pm for my email address, I'm not smart enough to do the install without instruction. Cheers!!

Hmm... Sent it earlier today (if that was you). Will check when I get in later tonight.

Arnie · 07-08-2009, 05:34 PM

Quote:

Originally Posted by Thomasio

Hmm... Sent it earlier today (if that was you). Will check when I get in later tonight.

sorry, my fault for not checking the junk folder

kmt63 · 07-12-2009, 11:07 AM

i keep asking this.but i would love to see some installed pics of your scoops.also if anyone is interested i have forming blocks to make the scoop grills and have screen for a few sets.they are available through thomas at rls.

Arnie · 07-12-2009, 08:16 PM

Quote:

Originally Posted by kmt63

i keep asking this.but i would love to see some installed pics of your scoops.also if anyone is interested i have forming blocks to make the scoop grills and have screen for a few sets.they are available through thomas at rls.

oh man! where were the grills when I needed them?? I bought some metal grills this past weekend, and I shall start the install this week. Will post some pics when it's done!

xziteme · 07-12-2009, 08:21 PM

A repeat of my other post of the installed scoops...

kmt63 · 07-13-2009, 08:11 AM

wow that carbon looks hot with the red body color.that see through effect is cool.how is that done.nice job on the install

xziteme · 07-13-2009, 09:47 AM

The see-thru effect was to show your awesome brackets in action.

A pic of the scoop off, another pic of the scoop on, and a little bit of PhotoShop will yield this see-thru effect.

kmt63 · 07-13-2009, 10:08 AM

Quote:

Originally Posted by xziteme

The see-thru effect was to show your awesome brackets in action.

A pic of the scoop off, another pic of the scoop on, and a little bit of PhotoShop will yield this see-thru effect.

thanks for the complement on the kit.im thrilled that these are working out for you guys.i have seen this see through effect on the honda tech forum with a carbon hood and the engine seen through it.really cool.never played with photoshop.

madden · 07-14-2009, 02:29 PM

payment sent

madden · 07-16-2009, 03:56 PM

any idea when these will be shipped out, I sent the payment but havent heard anything

danjunior · 07-16-2009, 06:57 PM

have pm you.do you ship to singapore?

kmt63 · 07-16-2009, 07:33 PM

danjunior.i returned your pm.yes thomas will ship to singapore.look on the first page of this thread for his contact info.

madden.the second batch is being laser cut right now.with anodizing and shipping.looking at about two weeks.

Thomasio · 07-16-2009, 08:09 PM

We are filling orders as fast as we can... the first batch sold out faster than we anticipated. Second batch will be shipping before you know it. They are worth the wait!

You can PM me with questions / orders / etc.

Thomasio · 07-16-2009, 08:10 PM

xziteme - very nice photos! Would you mind if we added one of them to the instrux?

xziteme · 07-16-2009, 09:49 PM

Of course, I wouldn't mind.

FYI, you emailed the instrux to me, but I never read it. The install is pretty straightforward. It took me awhile to figure out how the upper tab was to be mounted. The lower and rear mounting points are easy to figure out. It would've taken less time if I had read the instrux.

07-01-2009, 12:01 PM	#41 (permalink)
Ripple (.V.) Join Date: Oct 2008 Location: Simi Valley, CA Posts: 194	Yup got the instruction last night from Thomas, talk about great customer service. Thanks again for getting those out to me. I got them in last night and the install was pretty easy. I had already done it prior to getting the instruction but now that I have them, I'm going to go back and adjust them so they fit better. __________________ '05 Elise: AS w/Matte Black HT \| Touring Pack \| Starshield \| Larini SE \| Cup Car air box \| 6000k HIDs w/parking light LEDs \| CF mirror covers/door panels/side scoops \| JL Audio VR525/650-CXi

07-01-2009, 04:49 PM	#42 (permalink)
kmt63 Elise Driver Join Date: Jun 2008 Location: vancouver wa Posts: 380 Images: 2	good to here ripple.that is a load off my mind knowing that these are not so bad to install.its easy for me.but i have done it many times now. __________________ rls west~nci motor sports fabrication

07-04-2009, 09:33 AM	#43 (permalink)
kmt63 Elise Driver Join Date: Jun 2008 Location: vancouver wa Posts: 380 Images: 2	anyone have any pics of installed scoops? __________________ rls west~nci motor sports fabrication

07-04-2009, 09:43 AM	#44 (permalink)
MightyMike Legend in my own mind Join Date: Aug 2006 Location: Colorado Springs, CO Posts: 833 Images: 9	I'm going to install mine next week; getting clear bra applied to scoops intake and side skirts now. I'll post pics then. __________________ 06 ST Elise 02 SLK32 AMG BWR Supercharged w/CharlieX tune, Borla Exhaust, OCC, ACT XTSS Clutch, Zeitronix A/F Meter, LETSLA, Manly Mounts, RTD Brace, ReVerie Diffuser, Scoops, Side Skirts, & Shifter Ball, Forcefed Spoiler, & a bunch of other stuff

07-12-2009, 11:07 AM	#48 (permalink)
kmt63 Elise Driver Join Date: Jun 2008 Location: vancouver wa Posts: 380 Images: 2	scoop grills i keep asking this.but i would love to see some installed pics of your scoops.also if anyone is interested i have forming blocks to make the scoop grills and have screen for a few sets.they are available through thomas at rls. __________________ rls west~nci motor sports fabrication

07-08-2009, 04:10 PM	#45 (permalink)
Arnie Registered User Join Date: Jan 2008 Location: Hong Kong Posts: 98	Got mine yesterday, great stuff, can't believe even the allen key is included in the kit!! All I need now is my car, it's at the dealer having the AC fixed Thomas, if by any chance you read this, please check pm for my email address, I'm not smart enough to do the install without instruction. Cheers!!

07-12-2009, 08:21 PM	#50 (permalink)
xziteme Registered User Join Date: May 2006 Location: Anaheim Hills CA Posts: 391	A repeat of my other post of the installed scoops...

07-13-2009, 08:11 AM	#51 (permalink)
kmt63 Elise Driver Join Date: Jun 2008 Location: vancouver wa Posts: 380 Images: 2	wow that carbon looks hot with the red body color.that see through effect is cool.how is that done.nice job on the install __________________ rls west~nci motor sports fabrication

07-13-2009, 09:47 AM	#52 (permalink)
xziteme Registered User Join Date: May 2006 Location: Anaheim Hills CA Posts: 391	The see-thru effect was to show your awesome brackets in action. A pic of the scoop off, another pic of the scoop on, and a little bit of PhotoShop will yield this see-thru effect.

07-14-2009, 02:29 PM	#54 (permalink)
madden Registered User Join Date: Mar 2008 Location: Northern, VA Posts: 612	payment sent

07-16-2009, 03:56 PM	#55 (permalink)
madden Registered User Join Date: Mar 2008 Location: Northern, VA Posts: 612	any idea when these will be shipped out, I sent the payment but havent heard anything

07-16-2009, 06:57 PM	#56 (permalink)
danjunior Registered User Join Date: Mar 2009 Posts: 14	have pm you.do you ship to singapore?

07-16-2009, 07:33 PM	#57 (permalink)
kmt63 Elise Driver Join Date: Jun 2008 Location: vancouver wa Posts: 380 Images: 2	danjunior.i returned your pm.yes thomas will ship to singapore.look on the first page of this thread for his contact info. madden.the second batch is being laser cut right now.with anodizing and shipping.looking at about two weeks. __________________ rls west~nci motor sports fabrication

07-16-2009, 08:09 PM	#58 (permalink)
Thomasio really light stuff Join Date: Jul 2003 Posts: 3,503	We are filling orders as fast as we can... the first batch sold out faster than we anticipated. Second batch will be shipping before you know it. They are worth the wait! You can PM me with questions / orders / etc. __________________ 07 SY Exige S Really Light Stuff Intercooler . RLS Tubes . RLS Water/Methanol Injection . RLS 3.0" Pulley . RLS Wing Plates . RLS CF Window Panel

07-16-2009, 08:10 PM	#59 (permalink)
Thomasio really light stuff Join Date: Jul 2003 Posts: 3,503	xziteme - very nice photos! Would you mind if we added one of them to the instrux? __________________ 07 SY Exige S Really Light Stuff Intercooler . RLS Tubes . RLS Water/Methanol Injection . RLS 3.0" Pulley . RLS Wing Plates . RLS CF Window Panel

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-16-2009, 09:49 PM	#60 (permalink)
xziteme Registered User Join Date: May 2006 Location: Anaheim Hills CA Posts: 391	Of course, I wouldn't mind. FYI, you emailed the instrux to me, but I never read it. The install is pretty straightforward. It took me awhile to figure out how the upper tab was to be mounted. The lower and rear mounting points are easy to figure out. It would've taken less time if I had read the instrux.