Rear Spoiler for Elise - Page 3 - LotusTalk

designer · 07-11-2005, 10:29 AM

Quote:

Originally Posted by KMS Elise

I am going to Italy next month and go visit the PB Racing.

Did you go? What about that rear wing?

delliott00 · 07-11-2005, 11:53 AM

Designer,

They will sell you a wing direct. Email Stefano there (via the contact email link). They are very nice to work with. I have some very nice pictures of the wing and front splitter.

Its not cheap, but none of the CF parts for this car are... I think it was around 1000 Euros shipped to the US.

But, IMO, this is the best looking wing for the Elise. By FAR. I'm leaning towards getting one in the near future.

Plus its functional and they have done testing. The downforce specs are on their site.

-Dave

designer · 07-11-2005, 12:03 PM

Quote:

Originally Posted by delliott00

Designer,

They will sell you a wing direct. Email Stefano there (via the contact email link). They are very nice to work with. I have some very nice pictures of the wing and front splitter.

Its not cheap, but none of the CF parts for this car are... I think it was around 1000 Euros shipped to the US.

But, IMO, this is the best looking wing for the Elise. By FAR. I'm leaning towards getting one in the near future.

Plus its functional and they have done testing. The downforce specs are on their site.

-Dave

Dave,
Thank you for your response. I agree with you. It's the best one I have seen and I am very interested in ordering one. Would you be kind enough to send me the pictures? Please PM me and I will send you my address.
Cheers,
Jaime

Lotus F1 · 07-11-2005, 01:46 PM

I HAVE BEEN IN CONTACT WITH THEM AS WELL. Problem is they are also charging VAT @ 20% in that price.

For some reason they are not setup to exclude it on exports. To which I dont understand why?? They asked if I had an exemption number. To which I dont have. Does anyone here have one? I would buy it but I dont want to pay an extra $200.00 for nothing more then them not knowing how to export properly.

Zero · 07-11-2005, 02:13 PM

This isn't the best solution but you could pay the vat and then fill out the forms to get it back.

YAUDI · 07-11-2005, 02:29 PM

This is what I got from a generic translator about the Pb-racing wing:
"The new back wing in carbon for the Elise Mk2 is realized in fiber of carbon; the profile derives directly from the profile already used on the Exige Mk2 and brags a load of about 130kg to about 160/170 km/h, besides to confer therefore a determined more aggressive look, without to compromise it the elegance, the new wing from to the car a loaded best aereodinamico. The assembly is simple. The material in which can be realized are the same of the hard top, namely carbon, kevlar, carbon kevlar and a special silver carbon of fiber."

I do like the look, esp since is real close to the Exige. $1000-1200, if it's really high quality, outta of the way to access the trunk, and the support config makes sense, pricey but I could live with it...

lucien · 07-11-2005, 06:04 PM

I have ordered a carbon fiber wing and fiberglass splitter from PB racing for my Elise. They are ready to be shipped to me pending my wire transfer arriving in Italy. The wing and splitter can be seen on the www.PBracing.it website. The VAT can be refunded, however the shipping costs are not insignificant. Once shipped the wing and splitter should arrive within 7-10 days. I'll post pics when the goodies arrive.

Lotus F1 · 07-11-2005, 07:12 PM

From what I understand the shipping for the wing is 1030,00€+VAT

700,00 is for the wing the remaining is for shipping. 330,00 for shipping

Total for delivered with vat is about $1500.00 US

designer · 07-12-2005, 04:14 AM

Quote:

Originally Posted by lucien

I have ordered a carbon fiber wing and fiberglass splitter from PB racing for my Elise. They are ready to be shipped to me pending my wire transfer arriving in Italy. The wing and splitter can be seen on the www.PBracing.it website. The VAT can be refunded, however the shipping costs are not insignificant. Once shipped the wing and splitter should arrive within 7-10 days. I'll post pics when the goodies arrive.

What's the total breakdown on the costs?? I am going to pass on their splitter. I am ordering the Reverie carbon fiber version.

designer · 07-12-2005, 03:31 PM

Lotus F1 · 07-12-2005, 03:44 PM

Quote:

Originally Posted by designer

Dude did you not read my post? It directly answered your question

designer · 07-12-2005, 05:00 PM

Quote:

Originally Posted by 1FASTMX5

Dude did you not read my post? It directly answered your question

Sorry. Long day here! Thanks.

Lotus F1 · 07-12-2005, 05:54 PM

Quote:

Originally Posted by lucien

The VAT can be refunded

Please explain how. I would order it if I can get the VAT refunded.

Lotus Fury · 07-12-2005, 06:54 PM

Quote:

Originally Posted by ChrisStarrUSA

What are the wheels on that yellow car?????

SSR Comps? Maybe...

lucien · 07-12-2005, 07:37 PM

This is how it breaks down. PB racing Wing AND Splitter, 826,00 euro or $1008.99 for both using today's exchange rate of 1.221. Price for wing alone is 700,00 euro. Price for splitter alone is 320,00 euro. Special export price and discount for ordering both reduce the price to 826,00 euro or $1008.99. NO VAT. Several shippers are available. PB racing will help you find one. Shipping is expensive! If you make a purchase while visiting Italy, request a VAT refund form, fill it out and submit for a VAT refund. Bank transfer takes a while for money to be received by PB racing. US funds must go from your Bank to a US corresponding Bank then to an Italian Bank then to the PB account.

lucien · 07-20-2005, 04:53 PM

PB Racing shipped the Carbon fiber wing and fiberglass splitter to me this morning. It should arrive in 7-8 days from Italy.

Lotus F1 · 07-20-2005, 07:52 PM

Quote:

Originally Posted by lucien

PB Racing shipped the Carbon fiber wing and fiberglass splitter to me this morning. It should arrive in 7-8 days from Italy.

Cool I can't wait for some pics of it.. Please take many

PS.. The front splitter is fiberglass right?... Do you have to have it painted?

shay2nak · 07-21-2005, 07:48 PM

where the hell are the descriptions on their site. What's up with that 235 kit?

lucien · 07-23-2005, 04:57 PM

The PB Racing wing is carbon fiber and the splitter is unpainted fiberglass. I plan to paint the splitter Ardent Red to match and clear coat the carbon fiber wing.
For more detail about all of the PB Racing products, e-mail Stefano d'Aste or Laura at info@pbracing.it. You may call Stefano or Laura at 01139035203396.
I will take pics when the goodies arrive.
The wing and splitter should help the performance of the Elise by allowing late braking, improving traction in turns and improving acceleration out of turns. Getting to maximal speed more quickly and carrying speed deeper into the turns is more important, in my opinion. than acheiving the maximal speed on the straights. However, my maximal straightaway speed and lap times at Robeling Road earlier this week were better with a passenger (downforce?) in the car. We'll see.

MyElise · 07-23-2005, 05:46 PM

Quote:

Originally Posted by lucien

The wing and splitter should help the performance of the Elise by allowing late braking, improving traction in turns and improving acceleration out of turns.

Luc - Is the wing and/or splitter adjustable?

07-11-2005, 02:13 PM	#45 (permalink)
Zero Lift Addict Join Date: Aug 2004 Posts: 273	This isn't the best solution but you could pay the vat and then fill out the forms to get it back. __________________ Saffron Yellow/Sport (Exige Wheels)/Hard Top

07-11-2005, 02:29 PM	#46 (permalink)
YAUDI Fists of the Red Lotus Join Date: Nov 2004 Location: Fate, TX Posts: 776	This is what I got from a generic translator about the Pb-racing wing: "The new back wing in carbon for the Elise Mk2 is realized in fiber of carbon; the profile derives directly from the profile already used on the Exige Mk2 and brags a load of about 130kg to about 160/170 km/h, besides to confer therefore a determined more aggressive look, without to compromise it the elegance, the new wing from to the car a loaded best aereodinamico. The assembly is simple. The material in which can be realized are the same of the hard top, namely carbon, kevlar, carbon kevlar and a special silver carbon of fiber." I do like the look, esp since is real close to the Exige. $1000-1200, if it's really high quality, outta of the way to access the trunk, and the support config makes sense, pricey but I could live with it... __________________ -Fists of the Red Lotus- 2002 S4 MaD wAgOn, 2003 Golf TDI "Fuel Tank on Wheels", 2005 Ardent Red Lotus Cartoon Car, Sport Pack , Hard Top, Quicksilver RIP, 2bular 6" Ultra Thru , DBA rotors , BADAR888S, ekological HIDs, Fidanza+South Bend http://www.thedriversedge.net/, http://www.apexdrivingacademy.com/

07-11-2005, 06:04 PM	#47 (permalink)
lucien Elise Booster Join Date: Feb 2005 Location: Wilmington, NC Posts: 171	PB Racing Carbon fibre rear wing and splitter I have ordered a carbon fiber wing and fiberglass splitter from PB racing for my Elise. They are ready to be shipped to me pending my wire transfer arriving in Italy. The wing and splitter can be seen on the www.PBracing.it website. The VAT can be refunded, however the shipping costs are not insignificant. Once shipped the wing and splitter should arrive within 7-10 days. I'll post pics when the goodies arrive. __________________ LUC

07-12-2005, 03:31 PM	#50 (permalink)
designer luv my gut Join Date: Sep 2004 Location: Connecticut Posts: 331	__________________ PRESENT: 2009 C63 AMG Black PAST: 2005 Saffron Yellow, 2008 Mini Cooper S, 98 Panoz Roadster, '00 C5 Corvette, '98 Viper GTS Coupe, '88 911 Turbo, BMW M3, '95 911 Coupe.

07-12-2005, 07:37 PM	#55 (permalink)
lucien Elise Booster Join Date: Feb 2005 Location: Wilmington, NC Posts: 171	PB racing wing and splitter This is how it breaks down. PB racing Wing AND Splitter, 826,00 euro or $1008.99 for both using today's exchange rate of 1.221. Price for wing alone is 700,00 euro. Price for splitter alone is 320,00 euro. Special export price and discount for ordering both reduce the price to 826,00 euro or $1008.99. NO VAT. Several shippers are available. PB racing will help you find one. Shipping is expensive! If you make a purchase while visiting Italy, request a VAT refund form, fill it out and submit for a VAT refund. Bank transfer takes a while for money to be received by PB racing. US funds must go from your Bank to a US corresponding Bank then to an Italian Bank then to the PB account. __________________ LUC

07-11-2005, 11:53 AM	#42 (permalink)
delliott00 Registered User Join Date: Oct 2003 Location: Austin TX Posts: 338	Designer, They will sell you a wing direct. Email Stefano there (via the contact email link). They are very nice to work with. I have some very nice pictures of the wing and front splitter. Its not cheap, but none of the CF parts for this car are... I think it was around 1000 Euros shipped to the US. But, IMO, this is the best looking wing for the Elise. By FAR. I'm leaning towards getting one in the near future. Plus its functional and they have done testing. The downforce specs are on their site. -Dave

07-11-2005, 01:46 PM	#44 (permalink)
Lotus F1 Registered User Join Date: Aug 2003 Location: Fantasy Island New York Posts: 3,844	I HAVE BEEN IN CONTACT WITH THEM AS WELL. Problem is they are also charging VAT @ 20% in that price. For some reason they are not setup to exclude it on exports. To which I dont understand why?? They asked if I had an exemption number. To which I dont have. Does anyone here have one? I would buy it but I dont want to pay an extra $200.00 for nothing more then them not knowing how to export properly.

07-11-2005, 07:12 PM	#48 (permalink)
Lotus F1 Registered User Join Date: Aug 2003 Location: Fantasy Island New York Posts: 3,844	From what I understand the shipping for the wing is 1030,00€+VAT 700,00 is for the wing the remaining is for shipping. 330,00 for shipping Total for delivered with vat is about $1500.00 US

07-20-2005, 04:53 PM	#56 (permalink)
lucien Elise Booster Join Date: Feb 2005 Location: Wilmington, NC Posts: 171	Rear wing and splitter PB Racing shipped the Carbon fiber wing and fiberglass splitter to me this morning. It should arrive in 7-8 days from Italy. __________________ LUC

07-21-2005, 07:48 PM	#58 (permalink)
shay2nak I <3 chicken, I <3 liver Join Date: Dec 2003 Location: Land of da 1000 Oaks, CA Posts: 15,042	where the hell are the descriptions on their site. What's up with that 235 kit? __________________ save ~10 lbs gain 1 hp EQ: Y=(190X) / (1984-X) where Y is (HP) and X is (lbs) '07 EXIGE S * MY CAR ** VIDEOS! '08 ACURA TSX 6-speed http://www.makeNYNYagain.com

07-23-2005, 04:57 PM	#59 (permalink)
lucien Elise Booster Join Date: Feb 2005 Location: Wilmington, NC Posts: 171	PB Racing wing and splitter The PB Racing wing is carbon fiber and the splitter is unpainted fiberglass. I plan to paint the splitter Ardent Red to match and clear coat the carbon fiber wing. For more detail about all of the PB Racing products, e-mail Stefano d'Aste or Laura at info@pbracing.it. You may call Stefano or Laura at 01139035203396. I will take pics when the goodies arrive. The wing and splitter should help the performance of the Elise by allowing late braking, improving traction in turns and improving acceleration out of turns. Getting to maximal speed more quickly and carrying speed deeper into the turns is more important, in my opinion. than acheiving the maximal speed on the straights. However, my maximal straightaway speed and lap times at Robeling Road earlier this week were better with a passenger (downforce?) in the car. We'll see. __________________ LUC Last edited by lucien : 07-24-2005 at 05:02 AM.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode