The Lotus Cars Community banner
  • Hi there! Why not register as a user to enjoy all of the benefits of the site? You may register here. When you register, please pick a username that is non-commercial. If you use a name that appears on any search engine commercially, you must pick another name, whether it applies to you or not. Commercial usernames are for supporting vendor use only. If you want to become a supporting vendor and grow your business, please follow this link. Thanks!

garage clean out

9K views 55 replies 34 participants last post by  Supernaut 
#1 ·
any reasonable offers considered

BC Racing BR-type adjustable coilovers and springs 400/450lb (uses standard size springs)
http://www.lotustalk.com/forums/f172/review-bc-racing-coil-over-shocks-75035/

walbro 255lph fuel pump
oe header
rc 550 injectors
apr gtc 200 wing, with gurney flap, in trunk mounts, stock risers and custom riser
vforce harness bar
ferrea dual valve springs / titanium retainers
pair eibach springs 8 inch 2.25 inch inside diameter 800lbs (fits penskes, BC racing, probably others)
cup holder surround, needs repainted or upholstered
center console, needs repainted or upholstered
passenger foot rest
charcoal canister
oe intake manifold
touring pack sound deadening from behind the seat. is ripped into two pieces but came out of the car as such
tvs900 blower with preinjector bungs welded into the inlet, bolt in for VF kit, also 05 ECU with pump gas tune not using the preinjectors
could be used to replace blown mp62













 
See less See more
13
#6 ·
lot of stuff still available

BC Racing BR-type adjustable coilovers and springs 400/450lb
oe header 25
rc 550 injectors 150
apr gtc 200 wing, with gurney flap, in trunk mounts, stock risers and custom riser 750
vforce harness bar 200
ferrea dual valve springs / titanium retainers
pair eibach springs 8 inch 2.25 inch inside diameter 800lbs (fits penskes, BC racing, probably others)
passenger foot rest 20
charcoal canister 10
oe intake manifold 50
touring pack sound deadening from behind the seat. is ripped into two pieces but came out of the car as such 20
tvs900 blower with preinjector bungs welded into the inlet, bolt in for VF kit, (could be used to replace blown mp62), capable of north of 300whp 1000
05 ECU with vf2 pump gas tune not using the preinjectors 500
sun shields 20
cup holder insert 10
metal nose badge brand new 40
plastic nose badge with black sticker 10
aerocatch (used one for trunk lid latch) 25
radiator cap 5
rear tow hook 20
cf side scoops (some cracking in the finish near the bolt holes) 100
battery disconnect 5
bel 955 radar/laser detector 100












 
#9 ·
some more stuff

saikou michi catch cans
ep t45 rear upper mounts
set of dba4000 rotors, as far as I can tell they weren't used much at all
set of boe floating rotors that are worn almost entirely just passed the grooves (which may not be used all the way up from what ive heard as the grooves are shallow)
parking brake cable
steering rack
aem oil pressure gauge
black carpets with orange trim
25mm spacers x4
stock sway bar
under seat carpet
touring pack net
indicator lights all four corners
simpson 4pt harness
harness bar
cigarette outlet 2 ports
battery disconnect switch
rear uprights and two hubs with abs sensor
1x 3mm spacer
stock toe links
stock control arms
cobra motion sensor
stock cigarette outlet
rear calipers
2x stainless brake lines
1x stock brake line
some leather wrapped interior pieces
cowl modifed for racepaq iq3
1 set stock rear brakes
1 set all four corners hawk hps
bc racing shocks






























 
#12 ·
Still have some stuff left
few offers fell through, etc
added some stuff to the list
everything obo

rear calipers
stock steering rack
odyssey pc545 one that was used for about a week and another that was used for about 6 months. Both hold charge no problem. One has some black overspray on it
BC Racing BR-type adjustable coilovers and springs 400/450lb
ep t45 rear upper mounts
set of boe floating rotors that are worn almost entirely just passed the grooves (which may not be used all the way up from what ive heard as the grooves are shallow)
parking brake cable
aem oil pressure gauge
aem afr/lambda gauge
black carpets with orange trim
25mm spacers x4
stock sway bar
under seat carpets
touring pack net
corner lights
harness bar
vforce harness bar
cigarette outlet 2 ports
battery disconnect switch
rear uprights and two hubs with abs sensor
1x 3mm spacer
stock toe links
stock control arms
cobra motion sensor
stock cigarette outlet
2x stainless brake lines
1x stock brake line
cowl modifed for racepaq iq3
1 set stock rear brakes
seat belt bolts
oe header 25
rc 550 injectors 150
apr gtc 200 wing, with gurney flap, in trunk mounts, stock risers and custom riser
ferrea dual valve springs / titanium retainers
pair eibach springs 8 inch 2.25 inch inside diameter 800lbs (fits penskes, BC racing, probably others)
charcoal canister 10
oe intake manifold 40
touring pack sound deadening from behind the seat. is ripped into two pieces but came out of the car as such 20
tvs900 blower with preinjector bungs welded into the inlet, bolt in for VF kit, (could be used to replace blown mp62), capable of north of 300whp 1000
05 ECU with vf2 pump gas tune not using the preinjectors 500
sun shields 20
cup holder insert 10
plastic nose badge with black sticker 10
aerocatch 25
radiator cap 5
rear tow hook 20
cf side scoops (some cracking in the finish near the bolt holes) 100
battery disconnect 5
bel 955 radar/laser detector 100

photos of everything else in earlier posts
 
#15 ·
updated list

ferrea dual valve springs / titanium retainers
BC Racing adjustable suspension coilovers and springs 400/450lb
rear calipers
stock steering rack
odyssey pc545 one that was used for about a week and another that was used for about 6 months. Both hold charge no problem. One has some black overspray on it
ep t45 rear upper mounts
set of boe floating rotors that are worn almost entirely just passed the grooves (which may not be used all the way up from what ive heard as the grooves are shallow)
parking brake cable
aem oil pressure gauge
aem afr/lambda gauge
black carpets with orange trim
25mm spacers x4
stock sway bar
under seat carpets
touring pack net
corner lights, both fronts only
harness bar
cigarette outlet 2 ports
rear uprights and two hubs with abs sensor
1x 3mm spacer
stock toe links
stock control arms
cobra motion sensor
stock cigarette outlet
2x stainless brake lines
1x stock brake line
cowl modifed for racepaq iq3
1 set stock rear brakes
seat belt bolts
oe header 25
rc 550 injectors 150
pair eibach springs 8 inch 2.25 inch inside diameter 800lbs (fits penskes, BC racing, probably others)
charcoal canister 10
oe intake manifold 40
touring pack sound deadening from behind the seat. is ripped into two pieces but came out of the car as such 20
tvs900 blower with preinjector bungs welded into the inlet, bolt in for VF kit, (could be used to replace blown mp62), capable of north of 300whp 1000
05 ECU with vf2 pump gas tune not using the preinjectors 500
sun shields 20
cup holder insert 10
plastic nose badge with black sticker 10
radiator cap 5
bel 955 radar/laser detector 100
 
#16 ·
pm'ed and emailed. Hoping to hear from you soon. Paypal ready.
 
#18 ·
updated list

couple additions
cup holders, they match the stock interior plastic, and attach to one of the bolts holding the door panels
mud flaps
new cobra fob cases x2
2x black wheel stickers, work for rota or stock center caps, and a big sticker

still have the below

ferrea dual valve springs / titanium retainers
BC Racing adjustable suspension coilovers and springs 400/450lb
rear calipers
stock steering rack
odyssey pc545 one that was used for about a week and another that was used for about 6 months. Both hold charge no problem. One has some black overspray on it
ep t45 rear upper mounts
set of boe floating rotors that are worn almost entirely just passed the grooves (which may not be used all the way up from what ive heard as the grooves are shallow)
parking brake cable
aem oil pressure gauge
black carpets with orange trim
25mm spacers x4
stock sway bar
under seat carpets
touring pack net
corner lights driver front only
harness bar
cigarette outlet 2 ports
stock rear uprights and two hubs with abs sensor
1x 3mm spacer
stock toe links
stock control arms
cobra motion sensor
stock cigarette outlet
2x stainless brake lines
1x stock brake line
cowl modifed for racepaq iq3
1 set stock rear brakes
seat belt bolts
oe header
rc 550 injectors
pair eibach springs 8 inch 2.25 inch inside diameter 800lbs (fits penskes, BC racing, probably others)
charcoal canister
oe intake manifold
touring pack sound deadening from behind the seat. is ripped into two pieces but came out of the car as such 20
tvs900 blower with preinjector bungs welded into the inlet, bolt in for VF kit, (could be used to replace blown mp62), capable of north of 300whp
05 ECU with vf2 pump gas tune not using the preinjectors 500
sun shields
cup holder insert
plastic nose badge with black sticker
radiator cap
bel 955 radar/laser detector

 
#19 ·
heres some more stuff

25mm bolt on flares, they are painted black, photos below and what they look like on a car 400 obo
leather wrapped side sills (orange stitching)
speaker panel (one picture is from google, has net, doesnt have speakers, does have light)







 
You have insufficient privileges to reply here.
Top