Lotus stuff - LotusTalk - The Lotus Cars Community
 
LinkBack Thread Tools Display Modes
post #1 of 16 (permalink) Old 11-07-2012, 06:05 PM Thread Starter
Registered User
 
Join Date: Oct 2005
Posts: 1,162
Cat and Heatshield

Well now that I sold my Exige. I went through the garage and found some lotus stuff that I no longer need.

I have a factory cat that I bought for a spare but never needed it from a guy that took it off a car with less than 500 miles on it.

I'm selling it for $150 pickup in Santa Barbara if you want me to ship it, packing and shipping is another $50.

I also have a factory muffler heat shield somebody told me these things cost like $7-800. It's in excellent condition I bought it from the same guy that I bought the cat from $150 pick up or $200 shipped.

Holiday special $300 for the pair including shipping UPS ground
Any questions you can email me at 805 969 0893 operators are standing bycs3@cox.net PayPal only. Thanks Carl=
Attached Images
   

User formerly known as 4carl

Last edited by carl; 11-20-2012 at 06:33 AM. Reason: update
carl is offline  
Sponsored Links
Advertisement
 
post #2 of 16 (permalink) Old 11-07-2012, 06:08 PM
Terry

 
t955152's Avatar
 
Join Date: Oct 2010
Location: Los Angeles, CA/ Cupertino, CA
Posts: 2,014
email'd for floormat

t955152 is offline  
post #3 of 16 (permalink) Old 11-07-2012, 06:30 PM
Registered User
 
keatre's Avatar
 
Join Date: Dec 2011
Location: North Dallas, TX
Posts: 218
Garage
PM'ed about rotors.
keatre is offline  
post #4 of 16 (permalink) Old 11-07-2012, 07:02 PM Thread Starter
Registered User
 
Join Date: Oct 2005
Posts: 1,162
replied to all

User formerly known as 4carl
carl is offline  
post #5 of 16 (permalink) Old 11-07-2012, 08:06 PM
Registered User
 
rsamani's Avatar
 
Join Date: Jun 2012
Location: SoCal CP
Posts: 363
PM'd for questions
rsamani is online now  
post #6 of 16 (permalink) Old 11-07-2012, 09:19 PM Thread Starter
Registered User
 
Join Date: Oct 2005
Posts: 1,162
Ill measure the disks and post pictures . Carl

User formerly known as 4carl
carl is offline  
post #7 of 16 (permalink) Old 11-07-2012, 09:34 PM
Terry

 
t955152's Avatar
 
Join Date: Oct 2010
Location: Los Angeles, CA/ Cupertino, CA
Posts: 2,014
Quote:
Originally Posted by carl View Post
replied to all
i didnt get your email. i sent it from t955152@hotmail.com

edit: i found it in junk mail and yeah just paypal'd thanks!

t955152 is offline  
post #8 of 16 (permalink) Old 11-08-2012, 09:27 AM
Registered User
 
onETon's Avatar
 
Join Date: Jan 2012
Location: Bay Area
Posts: 686
You sure you don't want to ship the rotors? =\
onETon is offline  
post #9 of 16 (permalink) Old 11-08-2012, 10:22 AM Thread Starter
Registered User
 
Join Date: Oct 2005
Posts: 1,162
Mats sold measured rotors LF 25.62 RF25.79 RR25.73 LR 25.68 no cracks .Their a pain to ship $225 shipped for the set. or $75 picked up. thanks carl

User formerly known as 4carl
carl is offline  
post #10 of 16 (permalink) Old 11-08-2012, 10:27 AM Thread Starter
Registered User
 
Join Date: Oct 2005
Posts: 1,162
F&R all 4 are the same. carl
Attached Images
  

User formerly known as 4carl
carl is offline  
post #11 of 16 (permalink) Old 11-08-2012, 10:32 AM
Registered User
 
Mimzy's Avatar
 
Join Date: Nov 2007
Posts: 85
Pm sent on rotors
Mimzy is offline  
post #12 of 16 (permalink) Old 11-08-2012, 01:08 PM Thread Starter
Registered User
 
Join Date: Oct 2005
Posts: 1,162
rotors sold sorry.

User formerly known as 4carl
carl is offline  
post #13 of 16 (permalink) Old 01-25-2013, 01:56 PM Thread Starter
Registered User
 
Join Date: Oct 2005
Posts: 1,162
still have the cat and heat sheild

make a offer i want to clean out the garage .thanks carl

User formerly known as 4carl
carl is offline  
post #14 of 16 (permalink) Old 01-25-2013, 05:02 PM
He's on fire!
 
jds62f's Avatar
 
Join Date: Jun 2006
Location: IL
Posts: 2,226
Could you perform the following measurement on the cat and let me know the length in centimeters?

"hold a straight edge across the end of the 'U' bend pipe, and extend across to the the body of the converter. Measure the distance from this edge to the start of the weld bead at the outlet end of the converter body."

Here's a picture of the measurement I'm looking for:


"Give a man a match, and he'll be warm for a minute, but set him on fire, and he'll be warm for the rest of his life."
jds62f is online now  
post #15 of 16 (permalink) Old 01-26-2013, 07:17 PM Thread Starter
Registered User
 
Join Date: Oct 2005
Posts: 1,162
The cat is sold so its down to the factory muffler heat shield. These things cost like $7-800 new. It's in excellent condition price reduced to $100 pick up or $150 shipped. Check yours I'll bet its cracked, they all crack, rattle and buzz. Remember "Lotus it's not a car it's a hobby"
Thanks carl

User formerly known as 4carl
carl is offline  
post #16 of 16 (permalink) Old 03-17-2013, 05:48 PM Thread Starter
Registered User
 
Join Date: Oct 2005
Posts: 1,162
Quote:
Originally Posted by carl View Post
The cat is sold so its down to the factory muffler heat shield. These things cost like $7-800 new. It's in excellent condition price reduced to $100 pick up or $150 shipped. Check yours I'll bet its cracked, they all crack, rattle and buzz. Remember "Lotus it's not a car it's a hobby"
Thanks carl
someone take this stuff! carl

User formerly known as 4carl
carl is offline  
Sponsored Links
Advertisement
 
Reply

  LotusTalk - The Lotus Cars Community > Marketplace > Parts Market > Parts For Sale

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the LotusTalk - The Lotus Cars Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome