LotusTalk - The Lotus Cars Community

LotusTalk - The Lotus Cars Community (https://www.lotustalk.com/forums/)
-   Aftermarket Suppliers (https://www.lotustalk.com/forums/f172/)
-   -   Really Light Stuff - Supercharger Pulley Mk II (https://www.lotustalk.com/forums/f172/really-light-stuff-supercharger-pulley-mk-ii-81440/)

Thomasio 12-04-2009 10:30 AM

Really Light Stuff - Supercharger Pulley Mk II
 
709 Attachment(s)
Here is a new 3.0" pulley for the Exige S, S220, S240, etc.

Our pulley includes a tool to allow for simple installation and removal of the pulley nut: it allows you to hold the pulley stationary while torquing the nut to spec.

High quality aircraft grade aluminum is CNC machined here in the USA, and hard coat anodized for superior wear and corrosion resistance.

Only at RLS.

$135

shay2nak 12-04-2009 12:15 PM

3.1" also available?

Thomasio 12-04-2009 06:24 PM

709 Attachment(s)
If there is enough interest, I'm planning on doing 3.1", 3.0", 2.9".

3.0" will be ready in about 2 weeks, the others will depend on demand.

Thomasio 12-04-2009 06:28 PM

709 Attachment(s)
Free shipping on pre-orders. These will be shipping in 2 weeks.

PayPal to: ReallyLightStuff[ a t ]gmail[ d o t ]com

HKFEVER 12-04-2009 08:23 PM

909 Attachment(s)
Want one for 3.1"

Dave 12-05-2009 05:13 AM

How do you hold it stationary? Screwdriver through one of the pulley holes?

Thomasio 12-05-2009 07:28 AM

709 Attachment(s)
Quote:

Originally Posted by Dave (Post 1390222)
How do you hold it stationary? Screwdriver through one of the pulley holes?

The RLS tool engages a hex on the RLS pulley. Hold the RLS tool with a crescent wrench while using a socket that passes through the RLS tool to loosen (or tighten) the nut.

GOKUU 12-06-2009 04:21 PM

I want to buy these 3.0 pulley mark Ⅱ.

This is splendid.

jjm4life 12-07-2009 08:02 PM

so how much power should you pick up with the 3.0 pulley

Thomasio 12-08-2009 05:50 AM

709 Attachment(s)
Quote:

Originally Posted by jjm4life (Post 1390977)
so how much power should you pick up with the 3.0 pulley

Power increase with a 3.1" pulley is about 12 horsepower beginning early in the power band through to redline. The 3.0" pulley will be more than that. I recommend an ECU tune to be safe and make the most power.

shay2nak 12-08-2009 12:36 PM

3.0" pulley is like 10lbs boost?

jjm4life 12-08-2009 04:35 PM

Quote:

Originally Posted by Thomasio (Post 1391058)
Power increase with a 3.1" pulley is about 12 horsepower beginning early in the power band through to redline. The 3.0" pulley will be more than that. I recommend an ECU tune to be safe and make the most power.

im assuming thats whp? not bad for a fairly minor mod. the whole ecu mailing thing flat out sucks though. its a lot different than the evo where the ecu was wide open.

erubin 12-09-2009 05:56 AM

Will this pulley work with an s255 cup?

Thomasio 12-09-2009 06:33 AM

709 Attachment(s)
Quote:

Originally Posted by jjm4life (Post 1391228)
im assuming thats whp? not bad for a fairly minor mod. the whole ecu mailing thing flat out sucks though. its a lot different than the evo where the ecu was wide open.

Yes, that's on a chassis dyno so it is RWHP.

Thomasio 12-09-2009 06:33 AM

709 Attachment(s)
Quote:

Originally Posted by erubin (Post 1391333)
Will this pulley work with an s255 cup?

I do not know for certain, but I assume it is the same fitment.

shay2nak 12-09-2009 08:07 AM

All variations of the supercharged exige run the same boost. So there shouldn't be a problem.

onthebeach 12-09-2009 10:48 AM

newbie question but what is the size of the stock 240 HP pulley?

Thomasio 12-09-2009 10:59 AM

709 Attachment(s)
Quote:

Originally Posted by onthebeach (Post 1391457)
newbie question but what is the size of the stock 240 HP pulley?

Exige S, S220, and S240 (and others) use a 3.28" pulley from the factory.

onthebeach 12-12-2009 10:20 AM

Is (or will) 2,9" (be) available?

Thomasio 12-18-2009 08:39 AM

709 Attachment(s)
Now shipping 3.0" RLS Pulley Mk II !

(P.S. 2.5", 2.6", 2.7", 2.8", 2.9", 3.0" and 3.1" are still available in the regular configuration.)


All times are GMT -8. The time now is 04:44 PM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.

User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

 
For the best viewing experience please update your browser to Google Chrome