LotusTalk - The Lotus Cars Community - Reply to Topic
Thread: Mishimoto Sandwich Plate with Thermostat Reply to Thread
Title:
Message:
Trackback:
Send Trackbacks to (Separate multiple URLs with spaces) :
Post Icons
You may choose an icon for your message from the following list:
 

Register Now



In order to be able to post messages on the LotusTalk - The Lotus Cars Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










  Additional Options
Miscellaneous Options

  Topic Review (Newest First)
03-07-2016 09:14 PM
Krule Cant say as i have never had one. The mishimoto plate looks like it might fit, but it a tight around the block and pan...
03-07-2016 06:25 PM
XtinctElise
Is the Mishimoto Thermostat a Direct Replacement?

Quote:
Originally Posted by Krule View Post
Its deep in one of the oil temp posts.
Long and short, the after market mocal plate doesn't fit due to its port location and size. The thermostat, however can be directly swapped, prly could leave the plate on the car when doing it.
Now, in regards to oil temp....
The oil will get a bit hotter, but not 200'. The problem most likely is due to the oil volume and the passive cooling from the coolers even when the thermostat is open causing the oil to remain in less then ideal temps. Blocking off one or both of the coolers will still need to happen. I am going to be relocation my oil cooler soon, as i feel the high temp thermostat and a proper oil cooler is the way to go...
Here are some pics...
Do you know if the Mishimoto Thermostat is a direct replacement or if it has fitment issues?

Mishimoto Thermostatic Oil Sandwich Plate, by Mishimoto
02-22-2016 04:11 PM
AustinP
Quote:
Originally Posted by otoman View Post
The Mocal is cheaper so I'm probably going with it, thanks for the tip !

I'm running thick oil so that's even more critical to me ...

Shame, there is a member that went this route (AustinP) but did not care to share the results ...

That'd be me. I got the parts, including the adapter fittings, but still haven't gotten around to installing it. Last couple oil changes I did I was in a hurry, and didn't want to take the extra time.


Sent from AutoGuide.com Free App
02-21-2016 08:01 PM
Krule
Quote:
Originally Posted by bri3d View Post
Just as an update: the Mocal replacement plate doesn't fit very well as the configuration of fittings vs. thermostat is different and you can't really get an angle where the hoses come in properly but the plate also fits against the block. I had a second plate (glowshift) with my pressure takeoff so I just stacked that under the Mocal plate and it seemed to clear everything OK. But it turns out the thermostats are the same and so you can also swap the thermostats across. Another user had the same issue recently and documented it in some other thread that I really wish I could find right now...
Its deep in one of the oil temp posts.
Long and short, the after market mocal plate doesn't fit due to its port location and size. The thermostat, however can be directly swapped, prly could leave the plate on the car when doing it.
Now, in regards to oil temp....
The oil will get a bit hotter, but not 200'. The problem most likely is due to the oil volume and the passive cooling from the coolers even when the thermostat is open causing the oil to remain in less then ideal temps. Blocking off one or both of the coolers will still need to happen. I am going to be relocation my oil cooler soon, as i feel the high temp thermostat and a proper oil cooler is the way to go...
Here are some pics...
02-21-2016 02:37 PM
bri3d Just as an update: the Mocal replacement plate doesn't fit very well as the configuration of fittings vs. thermostat is different and you can't really get an angle where the hoses come in properly but the plate also fits against the block. I had a second plate (glowshift) with my pressure takeoff so I just stacked that under the Mocal plate and it seemed to clear everything OK. But it turns out the thermostats are the same and so you can also swap the thermostats across. Another user had the same issue recently and documented it in some other thread that I really wish I could find right now...
02-21-2016 11:20 AM
XtinctElise
Quote:
Originally Posted by otoman View Post
The Mocal is cheaper so I'm probably going with it, thanks for the tip !

I'm running thick oil so that's even more critical to me ...

Shame, there is a member that went this route (AustinP) but did not care to share the results ...
So which brand did you end up using?

Was it a direct swap or did u have to change anything?
09-19-2015 01:57 PM
bri3d I bought new 1/2" to 5/8" adapters when I did mine because I wasn't sure about the OEM ones and they weren't very expensive (I think like $5 each or so).
09-19-2015 01:27 PM
Krule Can the copper looking bsp fittings between the hose ends and the plate be reused? Or should I look for some 1/2 to 5/8 bsp adapters?
09-17-2015 06:32 AM
otoman
Quote:
Originally Posted by bri3d View Post
The factory thermostat is a Mocal and opens fully at 180F. Mocal also make a 200F sandwich plate called MOC-SP1T-HT, but you have to buy the whole thing at $110 and not just the thermostat. I'd imagine any sandwich plate with 3/4-16 filter threads and 1/2" BSP fittings would work fine with the stock gear.
The Mocal is cheaper so I'm probably going with it, thanks for the tip !

I'm running thick oil so that's even more critical to me ...

Shame, there is a member that went this route (AustinP) but did not care to share the results ...
09-16-2015 09:07 PM
Krule Has anyone else done this swap? Would be a quick/easy fix for our oil temp issues...
09-16-2015 07:00 PM
bri3d The factory thermostat is a Mocal and opens fully at 180F. Mocal also make a 200F sandwich plate called MOC-SP1T-HT, but you have to buy the whole thing at $110 and not just the thermostat. I'd imagine any sandwich plate with 3/4-16 filter threads and 1/2" BSP fittings would work fine with the stock gear.
09-16-2015 04:03 PM
otoman yes it does but I don't know if the thermostat has failed or is just lousy, but by seeing I'm not the only one experiencing low oil temps with dual coolers I'd say it's by design ...

Interestingly this part is no longer sold by Lotus and replaced by this one C120K6001F that was originally meant for 211
09-16-2015 03:40 PM
XtinctElise Does the stock plate have a thermostat to restrict flow? Good idea, I guess I never really thought about it.
09-16-2015 03:35 PM
otoman
Mishimoto Sandwich Plate with Thermostat

I have dual oil cooler and my oil temps are a bit low, it seems the lotus sandwich plate has a 72įC thermostat but my oil temperature never gets there on the road (unless on traffic).

My sensor is plugged on the bottom of the moroso sump so maybe I should add a few degrees for the oil entering the engine.

Anyway i was looking to replace the original sandwich plate with a one from Mishimoto and I was wondering If anyone has tried it :

Mishimoto Sandwich Plate with Rear-Mounted Thermostat, by Mishimoto

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

 
For the best viewing experience please update your browser to Google Chrome