The Lotus Cars Community banner

Search results

1-20 of 443 Results
Advanced Search
  1. Starting the Rebuild Process - 06 Elise

    Lotus Elise
    This thread is awesome! Are you using a base and clearcoat for the paint?
  2. Blower Motor Resistor DIY w/pics

    A/C, Heating and Ventilation
    I did I snuck through, anyone in the Pittsburgh area needs a surgeon take your clam off n give me a call>:) http://www.lotustalk.com/forums/f3/fix-your-hvac-blower-without-cutting-firewall-no-heater-hvac-removal-diy-400993/#post5853314
  3. Fix your HVAC Blower without cutting the firewall and no heater / HVAC removal DIY

    A/C, Heating and Ventilation
    Want to say Thanks to Randy for the awesome write up. I would have never guessed I could get to this wire like this But I did! If you picture the fanbox like a clock, the wires you need are at 7 and you should be going in between 10 and 11. I used the endoscope to see the 2 wires, pulled the...
  4. Dare to pressure wash

    Lotus Elise
    I would love to absolutely blow all the dust off of this area of the Lotus but I am not crazy enough to hit it with the pressure washer I was wondering if anybody else is though?? I guess I’m going to get a feather duster in a vacuum?????
  5. S2 Elise Front Clam East Coast Pittsburgh

    Parts For Sale
    Well you can see the repair from the back. I’ve been peeling plasty dip off my car for the past couple days now and I can’t bring myself the pill anymore right now’ I pulled a little bit off the front of the clam and remembered it was primered anyhow PS I know the grill inserts were...
  6. Koi Orange Plasti Dip + Lotus Elise

    Lotus Elise
    Getting down to the small stuff’
  7. S2 Elise Front Clam East Coast Pittsburgh

    Parts For Sale
    OK I was going to keep this but I don't have the room' It off my 06 S2 elise, the car was slightly wreaked in the front, the clam had been cracked by the license plate holder. It was repaired and looks good from the back. It is plasti dipped, you can peal it off to see the body work. Also the...
  8. Part Out - 2005 Elise

    Parts For Sale
    I was asking for the door pulls that go on the OUTSIDE of the car not the interior ones just trying to be sure in case you might have those ones
  9. Starting the Rebuild Process - 06 Elise

    Lotus Elise
    Yes my Elise is an 06 so you’re telling me the headlight pockets for 07 and up are hollow? Trying to figure out how to get my headlights from an 06 to fit in this style pocket
  10. WTB Exige S2 Headlights or any lights can fit

    Parts Wanted
    OK I’m just trying to piece of information together myself. I see your primeref clam shell is the same as my primerd clamshell as far as the headlight layout goes. my issue is my stock clamshell the orange one has built-in pockets that my headlights are built for And my headlights don’t fit in...
  11. Part Out - 2005 Elise

    Parts For Sale
    Do you have the door pools for the outside of the doors mine are in pretty bad shape’
  12. Blower Motor Resistor DIY w/pics

    A/C, Heating and Ventilation
    Sooo, I have my clam off, and I noticed my fan does not work on the third setting, works for 1 and 2. Guessing its a bad connection all together because the 3rd setting should be full power no resistors.. Have not attempted this yet, do not want to unhook the ac system really, I thought a read...
  13. DIY: Elise/Exige headlight Restoration/Seal delete

    Interior/Exterior
    I am shopping for these now. I have found flush mount led turn signals for street bikes have some ok options but still looking. Ebay is a start'
  14. WTB Exige S2 Headlights or any lights can fit

    Parts Wanted
    What does you headlight pocket look like ?
  15. garage clean out: spare parts, misc OE for sale

    Parts For Sale
    side mirrors - aspen white: $100 shipped : SOLD :grin2:
  16. Starting the Rebuild Process - 06 Elise

    Lotus Elise
    Hey I got a question for ya. I am rebuilding my elise as well, just putting on a body kit and I noticed something from your pics that I am going through now and you may be as well. Not sure how far along you are. If you look at where your headlights go on your original clam, the pockets are...
  17. Front End Customization

    Interior/Exterior
    Finally getting to putting this front end on and found the first issue I am going to deal with. Seems fixable if I add my own plate but wondering why my 2006 headlights don't fit in the new clam. Must have 2005 headlight sockets. anyone run into an issue like this?
  18. Koi Orange Plasti Dip + Lotus Elise

    Lotus Elise
    Yea, regretting the plasti Dip. Finally getting it ready for paint.
  19. Front End Customization

    Interior/Exterior
    I saw this on the lotus FB group, I am thinking of doing something like this with metallic white. The GTR clam has 2 body lines coming down the hood area so might keep that all black. Already will have black mesh and CF access panels. I'll keep my eyes open for the guy rebuilding, Still...
  20. Front End Customization

    Interior/Exterior
    Yes he defiantly can, he was willing to do various options for me on this one. One of the toughest choices I had to make was do I stick with original headlights or go with the new style ones. I love the new ones but they were going to be over 3k just to get the headlights and I just bought a...
1-20 of 443 Results
Top