Flow Rate: 600cc/min, 57LBS/HR at 3 bar (43.5 PSI)
Resistance: 12.8-14.5 Ohms
Voltage: 8-15 Volts, Nominal 13.5 Volts
Pressure: Min. 36 PSI (2.5 bar), Max. 100 PSI (7 bar)
Surface finish: Pink composite
All O-rings Included for installation.
Pigtail adapters included.
(These are my injectors as new. They have since been installed and were run for a short time on a dyno only. I changed the upper o-rings to stock.)