[LotusExige330]

Hi all,

Having removed all my airbags I have the airbag light on (even with the correct resistors fitted).

I currently have the speedo out. I'm sure I've read that it's possible to remove the light/bulb from the display but having removed all the noticeable screws/bolts from the display I still can't get to the bulbs?

Is access made to the front or back? I have the circuit board in front of me but I need this removed.

 

[LotusExige330]

I don't want to use tape or anything like that

 

[Lotusracingqc]

Just cut the wire in the back of the speedo, but i don't remember wich wire it is!! Me i put a a relay with a 4 sec timer to close the light for inspection, i just by-pass the wire in the relay, but if you just cut the wire the light close. Look at the diagram wire for the dash

 

[LotusExige330]

That sounds like a better way to go about it. What kind of relay do I need and how is it wired in? Sure I can find what wire it'll need to be.

 

[LotusExige330]

It appears to be BP - Black with a purple line... I'll give this a go but I'd like to wiring in a relay if anyone can help with this?

 

[LotusExige330]

I tried the BP - Black / Purple. No luck. Most likely a different wiring diagram. Does anyone know which wire it is?