The Lotus Cars Community banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1,006 Posts
Discussion Starter · #1 ·
I'm having a very hard time searching for the answers be it available or not, so I have no choice but to outright ask.

I have an 07 Elise

1) how do you turn on the beep for the alarm? When I arm/dis arm only lights flash.

2) I dont know what the option is called but most alarms go off when you disturb the car ( hit it ). Does this fancy-dancy alarm not do that?
 

·
Registered
Joined
·
1,006 Posts
Discussion Starter · #2 · (Edited)
Ok I finally found the manual, so I guess from what I read no beep for alarm on off and only has a Ultrasonic/Microwave Sensor, that I guess work together to sense motion.

I also found this on the FAQ page.

TURNING ON/OFF THE ARM/DISARM BEEPS
Make sure the alarm is unarmed.
1) Remove power by pulling fuse F11 or disconnecting the battery.
2) Reconnect power & press remote button “A” within 5 seconds of connecting power.

will try that at some point.
 

·
Registered
Joined
·
6,960 Posts
Ok I finally found the manual, so I guess from what I read no beep for alarm on off and only has a Ultrasonic/Microwave Sensor, that I guess work together to sense motion.

I also found this on the FAQ page.

TURNING ON/OFF THE ARM/DISARM BEEPS
Make sure the alarm is unarmed.
1) Remove power by pulling fuse F11 or disconnecting the battery.
2) Reconnect power & press remote button “A” within 5 seconds of connecting power.

will try that at some point.
That is the correct method of doing it.
Michael
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top