The Lotus Cars Community banner

Do you use Anti-seize on your sparkplugs when changing plugs?

1 - 1 of 1 Posts

·
Registered
Joined
·
3,372 Posts
I use some of the silver anti-seize. I don't know the torque. The NGK package says something about tightening by hand and then turning an additional amount. The additional amount was something like a 1/4 or half turn.

I started to use the anti-seize after I noticed it was very difficult to remove the old plugs. I'd also seen a post on this site about one member having broken a plug when trying to remove it.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top