Joined
·
452 Posts
it's funny how almost EVERY Lotus wiring is just as long as it needs to be... 
Anyone knows where this goes to?
21 - 25 of 25 Posts
Joined
·
619 Posts
I'll check that tomorrow. Today I used my scan tool and I found 8 codes, so I decided to erase them and start fresh. I started the engine and no light I let it warm up for a little bit and took it around the block and still no engine light. I installed a TRD box and accidentally didn't fully connect the hose and the car didn't want to start. After reconnecting the engine light was on, so I will reset that tomorrow. I will also be using the stock charcoal canister instead of the 255cup, since I was able to get a relocator bracket from sector 111. I am really hoping I can find where that plug goes to. Anyone out there with a supercharge exige that can give it a quick look?
Sent from AutoGuide.com Free App
I let it warm up for a little bit and took it around the block and still no engine light. I installed a TRD box and accidentally didn't fully connect the hose and the car didn't want to start. After reconnecting the engine light was on, so I will reset that tomorrow. I will also be using the stock charcoal canister instead of the 255cup, since I was able to get a relocator bracket from sector 111. I am really hoping I can find where that plug goes to. Anyone out there with a supercharge exige that can give it a quick look?Sent from AutoGuide.com Free App
Joined
·
619 Posts
Finally found the plug. It was attached to the block right beside the supercharger and above the starter. I will have to remove the oil pan in order to get to it, but after that it is time to put everything back together. Any ideas for the next mod?
Sent from AutoGuide.com Free App
Sent from AutoGuide.com Free App
Joined
·
7,520 Posts
Tune, lightweight components, suspension, wheels, blah, blah, blah. Always more mods.
San
21 - 25 of 25 Posts
