The Lotus Cars Community banner

1 - 1 of 1 Posts

Super Moderator
5,453 Posts
Discussion Starter #1 (Edited)
The standard brakes on the Elise/Exige are a cross drilled and ventilated iron disc.
Brake disc thickness
New = 26.0mm
Minimum service thickness = 24.0mm.

New maximum- 0.03mm
Service maximum - 0.10mm

Note: this is the correct figure (direct from Lotus UK) - there is a typo in the early versions of the service manual where it incorrectly states the service minimum as 24.9mm (the figure for the early S1 alloy discs).

Applies to the 308mm rotor'ed Lotus AP racing brakes also.
1 - 1 of 1 Posts