The Lotus Cars Community banner

1 - 8 of 8 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter #1
I had a problem with one of my o2 senser and resent my ecu with a 0bd2 sensor and my car will not start. I have the pes tune reflash bwr supercharger. All i can think is i messed up the flash when i reset on the scanner. Please help ?
 

·
shay2nak
Joined
·
25,083 Posts
that's what seems to me. I had a US flash onto a EU ECU and car didn't turn over either. All was fine when EU tune was flashed on EU ECU. So based on that experience i'd say someting up with your tune.
 

·
Vendor
Joined
·
3,333 Posts
Haven't seen this in over 100 kits on the road. I am curious to know what's up with the scan tool as well. Worst-case we can re-flash it.
 

·
Registered
Joined
·
12 Posts
Discussion Starter #6
thanks. it was not the ecu. I went back and checked the spark not spark but i could smell fuel. That made no sense to me that it was the ecu. So i checked all the wiring and it ended up being the ignition coil fuses.
 

·
Vendor
Joined
·
3,333 Posts
Awesome! Maybe the scan tool has the "blow random fuse" option? :p Glad you got it sorted.
 

·
Registered
Joined
·
917 Posts
check your ground screw on the body and on the engine, just in case.
 
1 - 8 of 8 Posts
Top