The Lotus Cars Community banner
  • Hi there! Why not register as a user to enjoy all of the benefits of the site? You may register here. When you register, please pick a username that is non-commercial. If you use a name that appears on any search engine commercially, you must pick another name, whether it applies to you or not. Commercial usernames are for supporting vendor use only. If you want to become a supporting vendor and grow your business, please follow this link. Thanks!

Coilover Rebuild/ride height

882 views 1 reply 2 participants last post by  kfennell 
#1 ·
Recently I had the Bilstein track pack coilovers rebuilt. The ride height on the coilovers were not touched however, I suspect the front sits slightly higher than prior to the rebuild. This is only a visual and not be measurement. All four were rebuilt.

One of the fronts had signs of a leak prior to rebuild so perhaps was sagging a bit on the spring more than after the rebuild?

Thoughts...
 
#2 ·
the leak would not affect ride height. Measure the ride height at the front jack points and set it to stock which is easy to look up. If you performance drive the car just take it somewhere to get a corner balance instead becuase it is very important on our cars.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top