[Coyne]

I ordered a set of angel eye LED rings from "t-revo-r" on eBay, and found some nice covers so they will diffuse better. I couldn't find any thread on these during the routine search, but wondered if anyone tried them before? I'm most likely going to customize them to give them an updated look before installing them. I'll have to find a thread on how to install these halos also. Pics!

 

[Coyne]

 

[Coyne]

 

[Coyne]

It fit like a glove on the 60mm ring, and there is a gap on the 70mm ring. Outside diameter on both.

 

[JamesAllen]

I have the same rings from Trevor, but have yet to install them. Would love pics of your car with the diffusers. Fitment might be an issue if you have the rings that were retrofitted to prevent burns in the acrylic headlight covers.

 

[Niral_Xige06]

pics or it didn't happen opcorn:

 

[Coyne]

I'll probably cut out the little black cylinder extension and try to fit these?

 

[bbs350z]

what are the sizes in mm for the top (headlight) and bottom (drl/highbeam)?

 

[Coyne]

what are the sizes in mm for the top (headlight) and bottom (drl/highbeam)?

60mm & 70mm respectively. It's strange that the larger ring is thinner, but hopefully it will fit.

 

[Blue Devil]

Cool

I'm very interested in your finished job, please post pictures.

I would just splice them into power from the headlights or the side marker lights. And just use hightemp black rtv for holding them on.

Thanks

:UK:

 

[Sylver]

Very interested also !
Where did you get these covers ?

 

[Fred_Fox]

this is tacky... angel eyes are just tacky **** for civics

 

[Coyne]

this is tacky... angel eyes are just tacky **** for civics

As elegant as your assertion is, realize that this is also to replace the barely perceptible DRL, and these rings actually connect to where the measly little bulb is located. Also, this looks pretty good:

 

[Pmth95]

Bookmarked

 

[ZeRoSL]

i DIYd mine that are basically the same thing.

thread here > http://www.lotustalk.com/forums/f322/another-halo-rings-thread-198402/

 

[Coyne]

i DIYd mine that are basically the same thing.

thread here > http://www.lotustalk.com/forums/f322/another-halo-rings-thread-198402/

Those look great! How is the clear housing holding up? Also, what did you adhere them to the housing with ?

 

[Coyne]

I know there were a few halo ring threads, but I specifically started this one to review the uses of the covers. The covers are inexpensive and available from LED Lights, Bulbs & LED Lighting Accessories - SUPER BRIGHT LEDS
Just search "halo" and they show up. $2-3 each. Be careful of sizes since the schematic looks confusing.

 

[ZeRoSL]

those are the same covers i used, and they hold up just fine. its very simple and cheap plastic covers and you pretty much get what you expect, no surprises. I did cover some selections and choices recommendations from my thread

 

[Coyne]

those are the same covers i used, and they hold up just fine. its very simple and cheap plastic covers and you pretty much get what you expect, no surprises. I did cover some selections and choices recommendations from my thread

I'll deep dive that thread in a few minutes. I appreciate the help! I'm considering trimming these down so they sit more flush.

 

[Blue Devil]

As elegant as your assertion is, realize that this is also to replace the barely perceptible DRL, and these rings actually connect to where the measly little bulb is located. Also, this looks pretty good:

View attachment 373569

LOL I think it looks awesome Coyne, thanks for the pic and the links. I don't like when people just attach those LED strips anywhere and everywhere that looks like tacky Civic sh*t

But this brings our car in line with the new Audi's and such, IMHO :clap:

:UK: