[GregsRaceParts]

I just bought these and used them for mockup , have never run them though.
The brackets are new but they don't include any hardware.
You will need Shallow head M10x1.5x30mm bolts and M10x1.25x50mm bolts to run them.
You can use these to directly bolt up 4 piston AP Brakes-like these: http://www.apracing.com/product_details/road_car_upgrades/road-aftermarket_brake_calipers/4_piston_calipers/cp5100_family-130mm_mounting_centres-suits_ø295x25.4mm_discs.aspx

Paid $160
Asking $120obo shipped.

 

[terryo]

i cant see these on the Elise parts site. can you be more specific as to applications. thanks

 

[GregsRaceParts]

i cant see these on the Elise parts site. can you be more specific as to applications. thanks

I noticed that also, not sure if I bought the last set or what,
They bolt directly up to Elise/Exige uprights--(130mm bolt spacing)
And they have the offset needed to bolt up the AP 5100 series calipers--
http://http://www.apracing.com/product_details/road_car_upgrades/road-aftermarket_brake_calipers/4_piston_calipers/cp5100_family-130mm_mounting_centres-suits_ø295x25.4mm_discs.aspx

These calipers have the same bolt spacing of 130mm, but have a larger mounting offset of 47.4mm rather than the stock 2 piston caliper's 33.75mm

So long story short, these mounts adapt any caliper that has a 130mm bolt spacing with 47mm offset.

Other Calipers may also work.

 

[GregsRaceParts]

Bump!

 

[GregsRaceParts]

bump!!

 

[GregsRaceParts]

Bump