The Lotus Cars Community banner

GA:*Speed & Mischief*>2 Day Evnt, Dyno Day, Meet, Cruise, Private Lounge Event

1337 Views 5 Replies 1 Participant Last post by  UpSideDownDesi
Due to some problems i had to postpone Dyno Day, and Kick off party. Apologize about the inconvenience, but the meet and the Cruise is still on.

Details:
Day 1, Feb 28th
- Speed & Mischief's Atlanta Car Meet @ 850 Lounge from 7:30PM-9:30PM. Parking lot has been reserved specially for the attendees to park their cars, but limited. So come on time.
-Then from there we will be rolling out in a group to either go to another Lounge. Call me for details 678-575-5304.


Day 2:
March 1st, Sunday
-Speed & Mischief Cruise.

We meet at 10:00 am, and roll out at 12:00PM.

THE AVENUE EAST COBB
Shopping Center

4475 ROSWELL ROAD (GA-120), EAST COBB

Look for Red and Green Balloons, that's where i will be with Cruise info, and direction. or PM me
1 - 6 of 6 Posts
date changed to Feb28th and March 1st
Update: Dyno Day postponed, check first post for more details.

I hate seeing this happening, i started planning for this from November, and this isn't making me happy either .

I am in process of locating another shop at the moment who will be willing to hold the event at such short notice, and price. All the other events are still on schedule (Atlanta Meet, Kick off party on 28th and the Cruise on the 1st, don't forget to come out to these). If i can't locate a shop by tomorrow, i will turn the cruise into a Day time cruise, and same location as Caffeine and Octane for the Cruise roll out since most are already going to be there. Please check the thread frequently for updates. Support from local community is the only way to make it better, dyno day was part of it. This isn't end of the event .

Also, event for summer is already under works. I am putting out all my chips for this one, event of the year for south east pretty much.
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top