The Lotus Cars Community banner

Gauge Cluster

1664 Views 5 Replies 4 Participants Last post by  Infimurf
I had to remove my ecu to get it reflashed a few weeks ago. I disconnected the battery and removed the ecu and shipped it out. When it came back i installed it and reconnected the battery.

Now no gauge cluster. No tach, spedo, mileage, fuel levels.

Any thoughts. Hope i dont need a new cluster.


Didnt realize i posted this twice....Sorry guys
1 - 6 of 6 Posts
Might be stupid, but did you double check your connection? The rear plug can be kind of tough to fully seat.

*EDIT* I'm stupid. I thought you said you sent your cluster out for some reason.
Hi.

What was the reason for the reflash? Could the battery be dead? Check fuses. When my dash cluster was replaced, the tech needed to enter some information from the cluster and update the ecu.

My money is on the battery. Will the car start? Lights work?

Alex
had sector 111 reflash the ecu cause it had a problem with emissions. everything was working fine before i disconnected the battery. car runs fine now. just no gauges. never touched anything inside the car
had sector 111 reflash the ecu cause it had a problem with emissions. everything was working fine before i disconnected the battery. car runs fine now. just no gauges. never touched anything inside the car

Strange....


Sent from AutoGuide.com App
Just an update on my gauge problem. It is all solved. Found out the ECU controls the gauge cluster. Sent the ECU back to be reflashed and now everything is working fine. Gauges are working and the Emissions data is available and i passed the emissions test.

Long drawn out process but its finally over.
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top