The Lotus Cars Community banner

1 - 20 of 44 Posts

·
Registered
Joined
·
2,509 Posts
Discussion Starter #1 (Edited)
So I am swapping to K24 and giving up any pretense this car will ever be on the street again. I have a TON of parts for sale and it's honestly too much to look at everything and take pictures so I am just going to make a list. If you are interested in paying a reasonable amount of money for any of these things LMK and I will get pictures and a price or just make an offer.

If you don't see it feel free to ask, I might have it.

Pass airbags
Door interiors off black cloth car.
Center console with TC button plastidipped black and scratched up
Rear Cupholder x 2
All dash pieces, all tabs good except the start panel.
Upper dash cross bar
Dash lower cross tray
Rear bulkhead
The carpet from the engine side of the firewall
All engine sensors X2
All electrical boxes in the car (relays, switches, alarms etc) - sold CDL box.
AC air distribution box that sits at the top of the AC hose from the HVAC box.
OEM drivers side engine mount
Aftermarket pass side engine mount
Clutch Slave
Valve Cover tapped for -10AN beather tube with fitting (awesome mod for track cars, but might only fit in an exige).
All Control Arms (FL sold)
Water Pump x 2
AC hoses from engine to bulkhead
Oil sandwhich plate with -10 fittings
Pillbeam Pedal box installed, never used.
Rover 2-11 chassis with cage
Chassis harness with damaged rear section that goes to clam.
2009 Expiration but never used Recaro Hans Seat
Front Extended balljoints from blackwatch
Alternator x 2
Starter x 2
Exige SC
Exige Torque 300 setup
Exige S Roof good condition
Exige S hatch medium bad condition.

[email protected] or 512-667-4642.
 

·
Registered
Joined
·
2,265 Posts
I am interested in the rear 5 spoke sport wheels.
 

·
Registered
Joined
·
2,509 Posts
Discussion Starter #4
Pretty sure I do, all the small interior parts will be a few days for me to get pics and prices as they are a little buried.
 

·
Registered
Joined
·
89 Posts
How much for...?
1. Oil sandwhich plate (I'm assuming this is not the stock oil filter mount, but a place to tap in for oil pressure, temp,etc)
2. A starter

I also thought I saw you post the BOE rear radial caliper mounts. Am I hallucinating?

As for shipping, I'm in 74137.
 

·
Registered
Joined
·
2,509 Posts
Discussion Starter #8
It is just the stock sandwhich plate with the -10 adapters installed to use an aftermarket oil cooler. $100 shipped for both?

I sold the caliper mounts
 

·
Registered
Joined
·
23 Posts
Interested in the oil pan and tapped valve cover, shipping to 91780. Also any photos of both parts by any chance?
 

·
Registered
Joined
·
2,509 Posts
Discussion Starter #11
Interested in the oil pan and tapped valve cover, shipping to 91780. Also any photos of both parts by any chance?
Ill get some tomorrow afternoon, both need cleaned still.

Do you have an exige or elise? I understand the place I drilled the valve cover may not work for an elise.
 

·
Registered
2006 Lotus Elise
Joined
·
1,109 Posts
I'd like a set of sun visors and the passenger-side rear parking light, the red one that sits just behind the rear wheel, if you have those parts?
 

·
Registered
Joined
·
2,509 Posts
Discussion Starter #15 (Edited)
Sorry I do not have either,

I do have a BOE panel delete
NA intake manifold
valve covers
2ge-fe coils
Both axles
Oem toe links in good condition
 

·
Registered
Joined
·
2,509 Posts
Discussion Starter #16
Here is the oil pan and tapped valve cover.
$225 + shipping for the pan including a boe gasket
$40 for the valve cover (no coils, does include block off plate and vacuum caps) This setup worked really well. + shipping.




 

·
Registered
Joined
·
2,509 Posts
Discussion Starter #17
Heres the front LSS wheels $500+ shipping for the pair?






 
1 - 20 of 44 Posts
Top