The Lotus Cars Community banner
1 - 7 of 7 Posts

·
Registered
Joined
·
76 Posts
Discussion Starter · #1 ·
A. 2-eleven fronts with springs (80N/mm - 460lb/in) - 1100 shipped
B. Exige/Elise front with spring (57N/mm - 325ln/in) - 350 shipped
C. Exige/Elise rear with spring (74N/mm - 425lb/in) - 500 shipped
D. Rear bumpstops (new) - 25 shipped

Detailed description:
A. Brand new bumpstops that can be easily fitted with a couple of simple tools.
Missing one lower pan and top bushing spacers. Came out of a car that upgraded to TTX. They can be used on Elise/Exige with ~100mm front ride height.
Click fine, very good condition!

B. Missing both lower spring pan and support spacer. Missing top bushing spacers. Strokes smooth and clicks fine, but overall looks a bit more used than the rest.

C. Missing bottom spring pan. Clicks fine.

D. These are the standard rears, but apparently they have stopped using color dye. New.

All the missing parts are normally available from performance shock in Sonoma and they are generally inexpensive. Give them a call!

Will take offer for the lot.

[email protected]
 

Attachments

·
Registered
Joined
·
76 Posts
Discussion Starter · #5 · (Edited)
Basically these are leftovers/spares from other projects.
I robbed bits and bobs off them in order to keep my running sets going.
Also, moving shops a couple of times resulted in losing stuff here and there.
The 2-eleven fronts are the only ones that were fitted to the same car and were replaced by TTX (kept the rears though).

All the shocks are in running order, but unfortunately not a complete matching set unless the rods and valving is changed by someone like PSi. For a fraction of price they can be a perfectly matching set.

I have completely moved away from Ohlins now, so all spares' inventory has to go.

Let me know if you have more questions.

Thanks

EDIT: This is probably the best place to buy all missing parts and/or service/revalve/reconfigure.

http://performanceshock.com/index.php?main_page=index&cPath=67_102_210
 

·
Registered
Joined
·
76 Posts
Discussion Starter · #6 · (Edited)
A. 2-eleven fronts with springs (80N/mm - 460lb/in) - 1100 shipped
>>SOLD<<B. Exige/Elise front with spring (57N/mm - 325ln/in) >>SOLD<<
>>SOLD<< C. Exige/Elise rear with spring (74N/mm - 425lb/in) >>SOLD<<
>>SOLD<<D. Rear bumpstops (new) >>SOLD<<
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top