The Lotus Cars Community banner

Status
Not open for further replies.
1 - 18 of 18 Posts

·
Registered
2010 Lotus Exige S260 Sport
Joined
·
210 Posts
Discussion Starter #1 (Edited)
I am almost finishing my build, that means I have some leftover parts for sale.

Cup 260 intercooler, used, 800$=original price-(30%+ no tax) discount

RLS 3.0 lightweight pulley brand new asking 140$= original price-(20%+ no tax) discount
2 Stock fuel rail, used, 100$ each
S260 Lotus Sport aluminum radiator 42mm aluminum lightweight, stock, used, 240$= original price-(50%+ no tax) discount
Stock fuel tank, used, 300$
S260 stock high flow fuel pump, used, 50$

continental dws tires, front and rear, used around 15000 miles, around 25000-30000 life left, 300$
Yokohama Advan A048 two front tires, used around 10000 miles front only, 100$
stock diffuser, used, 300$= original price - (60% discount + no tax)

Stock rear calipers, bells and rotors, used, 500$ (free pads with approximately 30% life)
Factory uprights all corners, used, 800$
Factory steering rack with steering arms, used, 200$
Factory wheel hubs all corners, used, 200$
Factory harness bar, used, 100$

There are a few other misc parts such as ball joints, and so on. Pictures upon request. I am in SF Bay Area. Prefer to deliver them locally for free. But will ship at your expense.

(Sold)Nitron wishbone 7075-T6 bearings (better than mono balls)
(Sold) Cup 260 lightweight intercooler tubes
(Sold) RLS 3 chambered CF shroud with baffles, brand new
(Sold) RLS side ducts kit, brand new
(Sold) Bosch ev14 750cc injectors, brand new
(Sold) Nitron designed 7075-T6 lightweight toe link kit, brand new
(Sold) 4 Factory rear light bulbs, used
(Sold) odyssey battery
(Sold) battery bracket
(Sold) fire extinguisher mount
(Sold) Euro Y Spoke wheels, 16 inch front, 17 inch rears with continental dws tires roughly around 2000 miles
(Sold) Lotus Sport Ohlins 2way dampers. This is the real deal to someone who knows dampers, revalve these to Lotus Cup spec and blows 99% of the rest of the dampers out of the water.
(Sold) AP racing factory BBK front, rotors, bells and discs
(Sold) Factory wishbones all corners
(Sold) RLS aluminum heat shield with gold foil, brand new

Thank you for your interest.
 

·
Acme Super Moderator ** The Enforcer **
Joined
·
7,594 Posts
I am almost finishing my build, that means I have some leftover parts for sale.

RLS 3 chambered CF shroud with baffles, brand new, 320$= original price-(20%+ no tax discount)
RLS side ducts kit, brand new, 340$= original price-(20%+ no tax discount)
RLS aluminum heat shield with gold foil, brand new 100$= original price-(20%+ no tax discount)
Cup 260 intercooler, used, 800$=original price-(30%+ no tax discount)

Take the whole intercooler related items above, 1500$ + shipping, over 30% discount (plus a few radium silicone couplers as freebies)

RLS 3.0 lightweight pulley brand new asking 140$= original price-(20%+ no tax discount)
Bosch ev14 750cc injectors, brand new asking 220$= original price-(20%+ no tax discount)
2 Stock fuel rail, used, 100$ each
S260 triple pass radiator 42mm aluminum lightweight, stock, used, 240$= original price-(30%+ no tax discount)
Stock fuel tank, used, 300$
S260 stock high flow fuel pump, 50$

Euro Y Spoke wheels, 16 inch front, 17 inch rears with continental dws tires roughly around 2000 miles, 800$

The following items are still on the car but I’m posting them for sale anyway because I am swapping out parts in April.

AP racing factory BBK front, rotors, bells and discs, used, 1500$ (free pads with approximately 60% life)
Stock rear calipers, bells and rotors, used, 500$ (free pads with approximately 60-70% life)
Lotus Sport Ohlins 2way suspension, stock, used, 2000$
Factory wishbones, used, 1000$

There are a few other misc parts such as factory uprights, steering rack, ball joints and so on. Pictures upon request. I am in SF Bay Area. Prefer to deliver them locally for free. But will ship at your expense.

Thank you for your interest.
You should post pics when you have a chance. I have many of the same RLS parts. GLWS.

San
 

·
Registered
2010 Lotus Exige S260 Sport
Joined
·
210 Posts
Discussion Starter #5
You should post pics when you have a chance. I have many of the same RLS parts. GLWS.

San
RLS makes quality products. I ended up with a lot of duplicates during the build. I will post more pictures after I get to my storage next week. Thank you.
 

·
Registered
2010 Lotus Exige S260 Sport
Joined
·
210 Posts
Discussion Starter #6 (Edited)
RLS 3chambered shroud and side duct kit sold. Thread bump. Adding one complete set of continental dws tires separate from wheel combo, two front a048 tires and stock diffuser for sale.

Also added Nitron suspension components.

Thank you for your interest, Bay Area enthusiasts.
 

·
Registered
2010 Lotus Exige S260 Sport
Joined
·
210 Posts
Discussion Starter #7
Wheels, toelinks, battery bracket, fire extinguisher mount and battery sold.

Still waiting for these guys to show up.

1260213
 

·
Registered
2010 Lotus Exige S260 Sport
Joined
·
210 Posts
Discussion Starter #14
Sorry, only the rear rotors and calipers left.

AP front calipers and floating rotors+hats pending sale
Ohlins pending sale
Wishbones pending sale
 

·
Registered
2010 Lotus Exige S260 Sport
Joined
·
210 Posts
Discussion Starter #15 (Edited)
Sold wishbones, Ohlins and APs. New week bump to the top!

Edit: sold the intercooler heat shield.
 

·
Registered
Joined
·
240 Posts
I’ll take the RLS heat shield if still available.
 

·
Administrator
Joined
·
2,078 Posts
closed
 
1 - 18 of 18 Posts
Status
Not open for further replies.
Top