The Lotus Cars Community banner
1 - 12 of 12 Posts

·
Registered
Joined
·
6,960 Posts
Discussion Starter · #1 · (Edited)
Available sensors for either the front or back.

These are unique, because unlike others, these are totally flush.

Included are four sensors, ecu, switch (front only), buzzer, wiring, mounting hardware and detailed instructions.

In-order to get a flush installation, usually the bumper has to be removed, however on the Elise/Exige, with no bumpers it is a relatively easy install because the clams are not removed.

Can be painted to match the cars color.

Can also indicate if another vehicle is getting too close.

These sensors are not cheap from China, but made by Cobra in Italy.

These are the same sensors car manufacturers install.

Introductory price $129.95. 17mm special drill bit $35 (refunded upon return).

Michael
 

Attachments

·
Premium Member
Joined
·
321 Posts
I've got some "parking sensors" on my car, but they are much bigger and multi function if you catch my drift. I really wish these were dual function.
 

·
Registered
Joined
·
6,960 Posts
Discussion Starter · #5 · (Edited)
How would one wire this system, i.e. if you put all 4 sensors on the rear?
Wires from each of the 4 sensors are routed to the ECU in the trunk. From the trunk a single wire is routed into the cockpit through a trim grommet in the rear window, I can guide any one through this.
Installation Instructions
 

·
Premium Member
Joined
·
12,195 Posts
I was wondering about the availability of such a system.

Good news.


Michael,

What do you think about adding TPMS to Elise?

Thx.
 

·
Registered
Joined
·
6,960 Posts
Discussion Starter · #8 · (Edited)
I will take a set if you can install them in the rear grill and not have to drill into the bumper?
Yes they can be installed in the rear grill.

I was wondering about the availability of such a system.Good news.
Michael,
What do you think about adding TPMS to Elise?
Thx.
I have an "Orange" TPMS system on my car and it works well.
Michael
 

·
Premium Member
Joined
·
12,195 Posts
As always, thank you, Michael.

Are you going to LOG? I estimate that you've earned about 567 beers from us all.
 

·
Premium Member
Joined
·
1,013 Posts
Wires from each of the 4 sensors are routed to the ECU in the trunk. From the trunk a single wire is routed into the cockpit through a trim grommet in the rear window, I can guide any one through this.
Installation Instructions
Will this one wire need to be spliced into an existing wire or is there a more OEM like spade connector; I hate cutting into the original wiring harness.
 
1 - 12 of 12 Posts
Top