The Lotus Cars Community banner

1 - 1 of 1 Posts

2006 Lotus Exige
104 Posts
Discussion Starter #1
I hope this is a easy question. I thought I know the answer but after reading several threads here and on a Toyota forum I need some clarification.

The Toyota manual I have shows you only measure the small cam between the cam and roller, not the large cam. Some threads say to use a screwdriver to hold the rocker up and measure both the small and big between the rocker and valve.

Sorry to be so dense but do I measure the big lobe? If so where and what specks do you use?
All 4 of my intake (small) were .011in between the roller and cam.
1 - 1 of 1 Posts