The Lotus Cars Community banner

Simpler shifter mod "bushing"

1170 Views 4 Replies 4 Participants Last post by  AZReason
Insted of a bushing I used one nut and washer where the bolt goes into the floor and one nut and washer against the shifter bracket. Infinitly variable stacking washers or cutting bushings to the right sze.


See less See more
1 - 2 of 5 Posts
My only concern would be it loosening up with vibration or use. Did you loctite the whole thing?
I did this a while ago so I forgot to mention that I used blue locktite. Thanks for pointing this out.

And before someone points out it is not infinitly variable length, but is continously variable.
1 - 2 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.