The Lotus Cars Community banner
1 - 4 of 4 Posts

·
Registered
Joined
·
25 Posts
I had my Starshield replaced with Xpel ultimate by DFW Clear Bra (clearcoatfilm.com). He did a pretty good job (said it took almost 9 hours of work just to get the old Starshield and all the adhesive residue off because it was coming off in pieces the size of a quarter). If you want to see the car and check it out for yourself, I usually try to make it to both the Dallas and Cowtown Cars and Coffee meets.
 

·
Registered
Joined
·
25 Posts
It was about $1500--removal of old Starshield, full hood (no seam in the middle is nice), access panels, rocker panels, rear quarters, mirrors and headlights.
 

·
Registered
Joined
·
25 Posts
TXdoogie, can you speak to whether the precut stuff fit your car well? Do you feel like there are gaps or seems that detract from its aesthetic or protective value?
The fit is pretty good--there are small gaps but most people have a hard time finding the edges after I tell them I replaced the Starshield. The only place I notice a gap is just in front of the side intakes on the top of the rocker panels (exactly the same as the old Starshield) and on the mirrors.

If you would like to check it out for yourself, let me know. I live north of Fort Worth in Keller. If you are on the Dallas side, I plan on going to Dallas Cars and Coffee this Saturday (as long as the weather isn't terrible).

I also know of a place that sells precut kits that have been tweaked to fit better (didn't know about this when I got mine). You could order his kit and then have someone local do the install. Check out Chuforiagraffix.com.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top