The Lotus Cars Community banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
965 Posts
This happened to me in both front and rear. A few things.

The front undertray needs to come off to provide access to an eccentric bolt to maximize front camber. I chose to take it off myself because I have a lift, front splitter and I knew I’d be more thorough. Still you’ll only get -0.9

I also found 31f 33r to be the sweet spot.

The PS4s is a great tire for street and occasional track days, but they just can’t handle the heat and heat cycles. They will delaminate. I switched to the Cup 2 Connects with the 240 wear rating (not the old Cup 2s) and they’ve seen 7 track days so far and have worn incredibly well. The shoulder is much stiffer than the PS4s and has shown no excessive wear. There is still plenty on meat left but the second section from the outside is wearing on an angle despite the shoulder with barely any wear.
 
1 - 1 of 1 Posts
Top