Need some help. Made an unfortunate discovery today. While doing an oil change on my '06 Exige I noticed a smell near the left front of the car. Upon closer sniffing (car was on a lift) I realized I had a problem. Did some inspecting with a borescope and discovered I had a dead mouse (assumed based on smell) and a nest (confirmed with borescope) directly behind the left front wheel. Good news is no damage and the smell is outside the car. Bad news is how do I get the sucker out of there. It's located where the big arrow is pointing in the picture. The only way I can find to access this cavity is from the back of the car following the coolant/oil tubing up the side of the car. Is there another way? This part of the fiberglass appears to be bonded to the chassis from what I can tell so not accessible if I remove the outer panel.
Thought about fish-taping a small vacuum hose up the side from the rear but can imagine what a pita that will be so would love some suggestions.
Thanks!
Thought about fish-taping a small vacuum hose up the side from the rear but can imagine what a pita that will be so would love some suggestions.
Thanks!