Not sure what you are talking about. The shiftr111+ is the same if not slightly shorter than the oem shifter (just measured myself). If you want to adjust the throw, your going to need to do it at the linkage with something like the Letsla.

I suppose in theory if you wanted to reduce the height of the shifter overall the only place would be the shaft, here is picture below I could find. I don't think it would be worth the hassle personally.

 

It's for high performance driving or racing. You want the shifter relatively close to the steering wheel. If you want to shorten the a the actual shift throws, then you can do it at the transmission side with aftermarket linkages.

 

It is not higher. We tried to keep it close to stock. It may appear higher in pictures - especially when naked.



Have you tried one? The gearknob location is as expected - right where you want it.

If you want a shorter throw, doing it at the trans linkage like our kit: HERE is what we recommend.

 

Are you thinking its taller because you're looking at OEM with the shift mechanism covered by the center console and you are looking at the shftr111 pics without the center console?

 

Correct to all above.....it looks taller. This is my first Lotus and manual. Yes mine is naked
@shinoo Yes there is one on my car currently

.
Thanks for the feedback

 

Correct to all above.....it looks taller. This is my first Lotus and manual. Yes mine is naked
@shinoo Yes there is one on my car currently View attachment 1331259
.
Thanks for the feedback

Place a stock gearknob onto your shiftR111 and see how it feels. That cylindrical knob may sit higher.

 

If you don't want it ill take it off your hands

 

Yea way too tall, I'll give you $50 bucks and my stock shifter... You're welcome..